LM-EPN22 Cascade 1080p HDMI Transmitter Over IP,120m HDMI Over Gigabit Ethernet Extender

FEATURES

1. Compliant HDCP.

2. Flexible and scalable HDMI 1080p High Quality Video Broadcasting with Gigabit Ethernet LAN.

3. Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable.

4. Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading.

5. Support Point-to-Point, Point-to-Many and Many-to-Many network configuration.

6. Up to 16 transmitters and more than 200 receivers in a single system.

7. With IR Control function ,it allows you control back the source at the end of destination

8. Built-in DIP switch to change Group ID and with multiple remote control ways.

9. Support IGMP v.1 &v.2 address

10.  Support cascading Ethernet Switches up to 3 layers.

SPECIFICATIONS

Product Description

Connection Diagram

Connection and Operating

A. HDMI Over IP One source to one display function

1. Connect one HDMI Cable between the HDMI output port of source device and the HDMI input port of Transmitter unit

2. Connect one HDMI Cable between the HDMI input port of display and the HDMI output port of Receiver unit.

3. Connect one UTP Cat5e or better cables between the RJ45 port of Transmitter unit and RJ45 port of Receiver unit.

4. Connect 5V DC power supplies to both Transmitter unit and Receiver unit.

5. Power on the output device first and the source second.

B. HDMI Over IP One source to more displays function

1. Connect one HDMI Cable between the HDMI output port of source device and the HDMI input port of Transmitter unit

2. Connect one CAT5e or better cable between the RJ45 port of transmitter and input port of Gigabit Ethernet switch hub.

3. Connect one CAT5e or better cable between the output port of each Gigabit Ethernet switch hub and RJ45 port of Receiver unit.

5. Power on the output device first and then the source device.

6. Use DIP switch has set up on the transmitter side (Group ID:0001) for each receiver. (Group ID:0001)

C. HDMI Over IP more sources to more displays function

1. Connect one HDMI Cable between the HDMI output port of source device and the HDMI input port of Transmitter unit.

2. Connect one HDMI Cable between the HDMI input port of display and the HDMI output port of Receiver unit.

3. Connect one CAT5e or better cable between the RJ45 of each Transmitter unit and RJ45 port of Gigabit Ethernet switch hub.

4. Connect one CAT5e or better cable between each RJ45 port of Gigabit Ethernet switch hub to RJ45 port of Receiver unit. User can select source channel by setting up dip switch on each transmitter unit. And select display source for Receiver units via one remote control.

5. Use DIP switch to select sources .

Product Display

 PACKING CONTENTS:  LM-EPN22 Cascade 1080p HDMI Transmitter over IP,120m HDMI over Gigabit Ethernet Extender

1. Main Unit. Transmitter & Receiver 120m HDMI Over IP

2. Power adapter DC 5V 1Ax2PCS

3. IR-TX cable & IR-RX cable                 

4. Operating Instructions