High carbonization ratio bamboo waste charcoal kiln bamboo charcoal carbonization furnace

Specifications

High carbonization ratio bamboo waste charcoal kiln bamboo charcoal carbonization furnace

Bamboo charcoal carbonization furnace:

There are two kinds bammboo charcoal carbonization furnaces in our factory:

1) Natural type bamboo charcoal carbonization furnace

2) Airflow type bamboo charcoal carbonization furnace

Raw materials of bamboo charcoal carbonization furnace:

1) Tree branches, Bark, Leaves.

2) Fruit shells, such coconut shell, walnut shell, palm shell, peanut shell, etc.

3) Wood, sawdust, wood briquettes, wood pieces, etc.

4) Corn cob.

5) Brown coal 

6) Plant straw/plant stalk.

7) Rice husk, wheat husk, etc.

Type-I Natural Type bamboo charcoal carbonization furnace:

Natural type bamboo charcoal carbonization furnace is like our old kind clay carbonization kiln.

Although it has longer carbonization time, it has better carbonization effect. This type bamboo

charcoal carbonization furnace's working principle is quite simple. It only uses incompletely

burning to get charcoal, after raw material in the furnace being set on fire, we need to closed

all holes on the furnace. At the beginging, we need the raw material's burning to creat heat.

The temperature is about 100℃ at first, when the temperature reaches about 350 ℃, raw

material will be decomposed into carbon dioxide, carbon monoxide, etc.

This type bamboo charcoal carbonization furnace need about 6-8 hours in the carbonization kiln.

Then we need to cool the raw material in bamboo charcoal carbonization furnace for about 8

hours.

Type-II Airflow bamboo charcoal carbonization furnace:

Airflow bamboo charcoal carbonization furnace is our most popular product, it uses advanced

thermal airflow carbonization technology. Which greatly increases the rate of carbonization,

carbonization rate is improved to 99%. And carbonization time improve to 6 hours. Airflow

bamboo charcoal carbonization furnace is convenient operation, good safety, high efficiency.

Airflow bamboo charcoal carbonization furnace can save a lot of energy, so it is good to 

environmental protection.( Residual volatile substances in the charcoal can discharge, which 

increases the carbon content of charcoal, improves graphite structure, engances electrical 

conductivity. (bamboo charcoal carbonization furnace)

The carbonization time of airflow type bamboo charcoal carbonization furnace only need about

3-8 hours per cycle. And it has large production capacity. If you have large production capacity,

we can make airflow bamboo charcoal carbonization furnace series for you. And about the

smoke removal system, we can install for you.

Features of bamboo charcoal carbonization furnace 

1) Advanced technical carbonizing system.

2) Environmental protection.

3) High carbonizing temperature, short carbonizing time(about 6hours)

4) High carbonizing ratio(about 95%)

5) Stable, reasonable structure.

Working precess of natural bamboo charcoal carbonization furnace

1) Drying stage: First, we should set fire on wood, tree branches, wood briquettes, etc.

(which we havelaid in the carbonization furnace) through four holes which locate furnace's 

bottom. Then close the holes. And close the upper holes till the thermometer (which loactes 

on the surface of thr furnace) reaches 180°C. At this stage, the temperature in the furnace 

will reach about 100-160°C,and all the water content will be evaporated.

2) Initial phase of carbonization: At this stage, the temperature in the furnace will reach 

350-400°C, wood, tree branches, wood briquettes, etc. will be decomposed into carbon 

dioxide, carbon monoxide,etc.

3) Carbonization stage: At this stage, the temperature will reach 800-1000°C, wood, tree

branches, wood briquettes,etc. will be decomposed rapidly and finally carbonized into charcoal.

4) Carbonization time: 34 hours (Carbonize briquette in furnace about 14 hours,then cool 

them about 20 hours in bamboo carbonization furnace)

Visitors came to test our natural bamboo charcoal carbonization furnace

Main parameter of natural bamboo charcoal carbonization furnace

Main parameter of airflow bamboo charcoal carbonization furnace

Wood charcoal carbonized by airflow bamboo charcoal carbonization furnace

If our raw material is in small size, such as sawdust, thin shell, bamboo wastes, how to

carbonize them in efficiency in bamboo charcoal carbonization furnace?

Dear customer, if your raw material is too small , and you also want to make good quality 

charcoal. You'd better not carbonize it in bamboo charcoal carbonization furnace directly.

Because of its low density, The carbonization effect is not as good as high density biomass

briquettes. So I suggest you choosing a biomass briquette machine to make small size raw

material into wood briquette, then carbonize wood briquettes in bamboo carbonization furnace.

In this way, you can get good quality charcoal briquettes.

The workflow is like this: small raw material→Hammer Crusher→Biomas briquette

machine→biomass briquettes→Bamboo charcoal carbonization furnace→Charcoal

briquettes

If your raw material is sawdust/leaves/bamboo wastes, etc. you need the following 

machine before carbonizing them.

Contact:

Delivery site of bamboo charcoal carbonization furnace:

  Lantian Mechanical Plant:

Lantian Mechanical Plant was founded in 1980s, it is a professional briquette machine

making factory since 1980s. Through 30 years' development and researchment, our

factory has specialized in briquette machine making area, carbonization furnace area, 

dryer area, crusher drea, etc. (bamboo charcoal carbonization furnace)

Factory show: