M100SC LCD Single Phase Electronic Din-Rail Active Energy Meter^ Power Meter

.35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.

.Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.

.Standard configuration 6+1 digits display(999999.1kWh). May select 5+2 digits display(Please specified when ordering).

.Seven digits LCD monitors standard configuration impulse output passive (polarity), may select distant impulse output with no power(no polarity).And contact with all kind of AMR system conveniently, complying with standard IEC62053-31 and DIN43864.

.Two LED instructions respectively power state (green) and signal of power impulse(red).

.Standard configuration don detect direction of the trend of load current. May select automatic detecting the direction of the trend of load current.And Instructions by an individual LED..

.Single direction measure single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC62053-21.

. Standard configuration type S connection(Inlet from bottom, outlet from top) for direct connect to use, we can also choose another type of connection,and use CT (product configuration code is IC) and PT&CT (product configuration code is HC) for operation.

.Standard configuration extended terminals cover, in order to protect to use electricity safely, may select short terminals cover.