DTS3666 Three Phase Multi-function^ Active Reactive Electric Power Meter, Energy Meter

●Specifications：3×230/400V 10(100)A 1000imp/kWh 1000imp/kvarh

●Accuracy: Active Class1, Reactive Class2

●50Hz Rated Frequency: 50Hz

●Starting Current：≤4‰Ib

●Creeping：The impulse put out shall be no more than one when 115%Un is applied to the voltage circuit and no current is in the current loop.

●Outer Dimension：153mm×300mm×77mm。

●Weight: around 1.4kg。

●Electric Parameters

Reference Standard

1. Energy Measuring Function
The meter measures forward and reverse power, and can also measure the total reverse energy sep-arately, and store all the data. All the stored data will not be lost after power failure and can be kept for above10 years.

2.maximum demand functions

3.Measure Instant parameters
The meter can measure and monitor clock, voltage, current, power rate, power factor, frequency and other electric parameters at real time.

4.Record events
The meter can record all the events detected: magnetic interference,meter cover opened, terminal cover opened, by pass, low power factor, power up, power down, unbalanced voltage, over voltage, under voltage, over current, under current and so on. It can record how many times the events hap-pen and when the events end.

5.Rotating Display Function
The meter can display parameters in rotation. The rotating items and rotating time can be set. No more than 32 items can be displayed the displaying time for each item can be set between 2 to 60 seconds. The defaulted time is 5 seconds, and rotating sequence can be set too.

6.Communication Function
Communication interface: The meter has one optical interface and one RS485 interface. The meter can be read and programmed via optical or RS 485 interface. The Baud rate of optical interface and RS485 interface is 4800 bps. Read the meter during an outage: The data can only be read based on the LCD display during an outage.

7.Output Interface
Active/reactive-impulse output is helpful for testing the accuracy of the metering measurement. One second-impulse-output interface is helpful for testing the clock error.

Being packed according to the international standard is to guarantee safe delivery during the transportation. 

•Professional manufacturer with internationally standard production lines and a devoted technical team.

•Strict test procedure with advanced test equipment

•Responsive and responsible service team.

•Door to door service when needed.

•Helpful and enthusiastic in developing the buyers’ business. 

•Treat your career as our career. 

Certifications: