Schenck Horizontal Balancing Machine Hm1bk

FOB Price

US$ 1,000 - 100,000 / Pack

1 Pack(Min. Order)

Port Shanghai
Payment TermsT/T

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin	Shanghai, China	Brand Name	Schenck
Model Number	HM1/HM10	Power	Electronic
Usage	Vibration Testing Machine

Product Description

per bearing pedestal	max. max.	12 kg 6 kg
Rotor weight (as long as an accommodation of the rotor is possible due to the geometric data and the minimum achievable residual unbalance is sufficient for the balancing task.)	min.	unlimited
Distance between bearing centers (500 mm length machine base) distance between bearing centers with belt drive	max. min. min.	450 mm 15 mm 40 mm
Rotor swing diameter above the machine base Rotor swing diameter within the motor range	max. max.	360 mm 200 mm
Journal bearing diameter	max. min.	22 mm 5 mm
Belt Driving Diameter		10-150 mm
Balancing speeds based upon 50 mm belt driving diameter approx. (with other belt driving diameters, the speeds change accordingly. in addition, the speed range of the measuring unit must be taken into account. see item 2)	220 - 2 200 rpm
wn²-value for permanent calibration	wn² = 80x10⁶kg/min²
u_marminimum achievable residual unbalance (according to iso2953) -each bearing plane 0.1 gmm per kg rotor weight -but not better than the maximum measuring sensitivity of the measuring unit 0.1gmm ( this value is refering to the measuring speed of 1000 rpm with cab708, also influenced by the rotor characteristics and support bearing. see specification of the measuring unit)
unbalance reduction ratio (urr)	≥ 95%

inserted computer system
operation using windows standard procedures
ecu control unit with can - bus
usb interface and networking capability

2.        Presentation of Unbalance or Unbalance Correction
->    Display in large, easy-to-read digits and in vector form, simultaneously for         both correction planes, with amount and angular position.
->     The following types of unbalance display are available:            - Dynamic unbalance in two correction planes            - Static unbalance in any correction plane            - Static and couple unbalance            - Static and dynamic unbalance
-> The following methods are available for presentation of the type of          unbalance correction:            - polar: amount and angular position            - components: amount at two adjacent locations                (max. 100 symmetrically or unsymmetrical distributed locations).
3.        Setting the measuring instrumentation
->        During instrument set-up, a clearly understandable presentation of the            rotor mounting arrangement assists and guides the user through the            procedure of entering the correct geometrical data for the rotor.
->        For storage and fast recall the set up parameters for frequently recurring            types can be stored on the pc: the numbers of storable rotors practically            are unlimited.
->      Basic Functions            - Selection of six different accommodation possibilities.            - Input of distances between correction planes a, b and c.            - Input of correction radii.            - Change-over between addition or removal of material in a given correction plane.            - Presentation of different types of unbalance (dynamic, static, stat./couple, or dynamic/static).            - selection of type of correction display (polar or in components, sectors)            - input or measurement of balancing speed            - input of the desired tolerance per correction or control plane, or calculation              according to din iso 1940
->       Additional functions            - index balancing            - single compensation            - compensation of parallel key            - input of an alphanumerical identification for each rotor            - input of set-up data            - re-calling previous unbalance            - operator name            - deviation of first unbalance correction location from zero angle
4.        Measurement
->     Automatic adaptation of sensitivity to signal magnitude
->     Automatic start of measurement after required speed range has been reached
-> Manual or automatic locking of unbalance readout with pre-selection          of measurement time, calculation of mean value.
-> Display of the tolerance in the vector display.
->     Comparison of measured unbalance with a specified tolerance and          indication of a factor showing the relationship to the specified tolerance         (x times tolerance); colour change and appropriate message on achieving          the tolerance.
->    Display of unbalance or unbalance correction at the user's discretion.
->     Selection of units: metric, inch or mixed.
->     Automatic or fixed scale, with possibility of manual alteration.

5.        Reporting
->     Extensive functions for adapting the measurement report to the         user's requirements.
->     Capability of recording the current -            - rotor data,            - list of all rotor type data,            - measurement data (balancing report),            - calibration data.
->    Configuration of balancing report and storage for fast retrieval.
->     Predefined standard configuration.
->    Viewing of all entries and measurement results in a page preview.
->    User-specific header is possible (e.g. company address or corporate logo).
->     User-defined comments.
-> Storage of balancing report in a file for subsequent printout.
->     Supports all common printer types.
6.        Special features
->     Manual display for angular indexing(option item)
->     Storage of measured unbalance values in a standard format for further processing
->     Simple use of programs available in the system (pocket calculator, note pad).
->     A password system can be used to protect the data from modification by unauthorized persons.
-> The software includes a variety of functions for automatic self-testing of the measuring instrumentation.
->     Communicating with measuring unit through can-bus, receiving the control signals from the measuring unit, realizing the functions such as: auto-stop after measuring, over-speed monitoring, clockwise and anticlockwise turning (not apply to servo motor).
Technical Data

Operating System LCDdisplay Ambient Temperature Relative Humidity Protective Rating	Windows 7 embedded (english version) Active TFT color display, 15" 0-45 ⁰c < 90 % IP 65 at the front
Speed Range: Automatic Selection of the following ranges depending on the required speed:	120 - 5 000 rpm 120 - 370 rpm 370 - 900 rpm 900- 2 300 rpm 2 300- 5 000 rpm

Minimum achievable residual unbalance (umar):
Resolution:	In each speed range, unbalance display is independent of speed.
	Resolution increases by a factor 10 from one speed range to the next.
Average Measuring Time:	Adjustable from 0.5 sec (excluding start-up and braking)
Speed Measurement:	Numerical, 4-digit, max. error + 0.1 % of measured value + 1 digit,
	Refresh time approx. 1 sec, storage of readout.
Power Supply: (automatic adaptation)	100-230v, 50/60 hz

Accommodation
Two different assembly mothed on the machine depends on the machine type (not include the special designed machine)
1 Measuring unit with 15" TFT LCD, assembled in the control cabinet. Accessories include a keyboard and a mouse in the drawer. 2 Measuring unit with 12" TFT LCD, assembled on the swivel arm for small size machines. Accessories include an integrated keyboard and mouse.
Dialogue Languages:
English & Chinese, other languages upon requires.

Contact Us

Schenck Shanghai Machinery Corp., Ltd.: Contact namerende zhu
Chat Now; Phone86-21-66897200; AddressNo. 1111, Fengxiang Rd.

*Email
Please enter Your valid email address.
*To

rende zhu
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Automatic Balancing Machine	New Products	Schenck Balancing Machine for crankshafts	Schenck Balancing Machine for Small Armatures
Schenck Checking Balancing Machine for crankshafts	Schenck Field Balancing Machine	Schenck Horizontal Balancing Machine	Schenck Shaft Balancing Machine
Schenck Vertical Balancing Machine

Schenck Horizontal Balancing Machine Hm1bk

You May Like

Product Details

Product Description

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category