Marine paint for dock surface

Product Information

High gloss, alkyd based varnish providing superior decorative performance.

Excellent color and gloss retention.

Easy for application.

Recommended Purpose

For use on topsides, superstructures, interior and exterior wood surfaces for maintenance of ships and new buildings.

Color:Colorless, Transparent

Sheen: High gloss

Solid volume:50 ± 2%
Theoretical coverage:20.00 m2/lt at 25 microns dry / 50 microns wet.

Recommended Film Thickness: 50 microns dry by 2 coats

Flash point:>35℃

VOC: 385 g/lt (material as into the container)

Storage:More than 12 months at 25℃. shaded and ventilated condition. The container/paint, must keep sealed and away from heat and ignition.

Pack Size:20L. If other packing specifications are needed, please consult with our Company.

Mixing Ratio:                    Single pack product which should be stirred well                                                              before application by stirring machine.

Thinner:                            Not recommended. The material is ready for use, under                                                  special conditions use X100 Thinner, max 5% by volume.

Painting Method:              airless spraying (Recommended), general spraying or                                                      brush painting. Airless nuzzle diameter: 0.28mm -0.33mm,                                                blowing pressure shouldn’t be less than 141kg/cm2                                                          (2000psi). Use proper equipments. It is possibly necessary to                                          use the thinner.

Tool Cleaning:                  X100

Drying time:

All surfaces should be clean, dry and free from contamination.

High pressure or pressure with fresh water wash should be applied prior to the treatment or of the application.

Steel products with mill scale: shot blasting or grit blasting should meet the requirements of Sa2 grade in Sweden derusting standard at least.

Steel products without mill scale: to be grinded by dynamic tools to meet the requirements of St3 grade in Sweden derusting standard.

Steel products painted with plant primer: use slight grit blasting or dynamic tools to carry out secondary surface preparation to meet the requirements of St3 grade in Sweden derusting standard.

For other surface treatments, please consult with our Company.

Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read carefully and conform to precautions on MSDS and packing vessels.

To avoid eye and skin contact, such tools as gloves, goggles and face mask etc should be used for works (proper safety. measures should be taken according to construction methods and circumstances).

All works with the product must be carried out according to all relative national health, safety and environment standards and codes.

This product is for professional use only.

Shanghai NH Trade Co.,Ltd.

Has more than 3o years in paints, is a company specialized in paint and coat production and distribution. Major products of the company include interior and exterior wall paint, industrial anti-corrosive paint, floor paint, powder coating, fluorocarbon baking paint, wood furniture paint and boat paint. So far, the company has passed ISO 9001 International Quality Management System Certification and ISO 14001 International Environmental Management System Certification.

1. Why Choose us?

• 100% factory products 
• The delivery is assurable, the price is reasonable for we have our own factory
• All our products is high performance and good quality
• NH has more than 30 years experience in paints / coating , so we could offer professional scheme

2. What's  your MOQ (min order quantity) ?

    Our MOQ is 1000Kg, and we accept mixed order.

3. Sample is free?

      We offer free sample.  

      You could choose sample board or sample paint

4. Which certificates do you have?

         Usually, we have ISO 9001, ISO 12944, SGS , ROHS, CNAS, IAF, MSDS...

         We could help you to test the products according to your country's request.  

5. Any OEM service?

     Yes, we could packing the paints according to your request, add the LOGO.

GO FURTHER, DO BETTER !!!