10A 12V/24V MPPT solar charge controller for solar home system, manufactured by wuhan wanpeng

Specifications

              MPPT1024Z Solar Charge Controller with

Maximum Power Point Tracking

Functions

(1) Maximum Power Point Tracking technology

The controller uses Buck conversion circuit and MCU technology to track the maximum power point to implement the maximum output power of solar panels in different illumination intensity and temperature. The MPPT algorithm increases efficiency of your PV system and decreases the quantity of solar panels.

(2) Multi-stage Charge Control

The starting charging voltage of battery is different, the controller will use the different charging strategies to finalize the charging process. When starting charging voltage of battery is lower than 12.4V (for 12V battery), battery will go through three stages as Bulk, Absorption and Float charging. When starting charging voltage of battery is higher than 12.4V (for 12V battery), battery will go through two stages as Bulk and Float charging.

Bulk Charge, Absorption Charge, Float Charge.

(3) Charge Voltage Temperature-compensated

(4) Discharge Control

(5) Protection against Reverse Connected Battery

(6) Protection against Reverse Connected Solar Modules

(7) Reverse Current Protection

(8) Over temperature Protection

(9) PV Over voltage Protection

(10) Current-limited for Excessive Charging Current

(11) Load Output Overload Protection 

System Voltage

Dimensions

Mounting hole pitch: 60mm*178mm

Mounting hole diameter:  5mm

Height*Width*Thickness:  92.5mm*188mm*55.3mm

Connecting terminals: Maximum 6mm²  

Connecting diagram

Technical Data

Contact with us if you need more detailed information about this MPPT1012.

Relate product:

We have MPPT controller with 10A,20A,30A, 12V/24V

                                                      30A,60A, 48V

Contact with us if you have anything need.