1000l beer brewery equipment, large beer fermenter equipment, beer fermentation tank

Heating source: steam jacket heating, electric or direct fire

Material: stainless steel 304 or copper

Warranty period: 36 months for main equipment 

Main technical parameters of the brewhous system:

1. Brewhouse System

1)--Mash/Lauter tun installed mash agitator, 

Installed rakers and false buttom for grains separation

--Usage:Mashing, mixing-stainless steel mixer driven by frequency convertor, 

lautering-eparation of mash grains from wort during wort producing process. 

2)--Brew/whirlpool tun, wort boiling and make wort whirlpooling

-Usage: wort boiling and whirlpooling

-Wort Whirlpool-sanitary centrifugal mash pump activate the whirlpooling.

-Heating: electricity gas fired or stream 

3)--Hot water tank-water heating and hot water storing/preparation

connected to the controller for automatic temperature controlling

1)-inner wall stainless steel 304, 3mm;
-surface wall stainless steel 304 or copper, 1.5mm
2) Dome top, top manway with glass,Side manway, cone bottom 160 degree
3) -insulation: polyurethane/rockwool 100mm;
-with inside CIP washing ball
-raking agitator
-removable false bottom
-sparging arm, sight glass
-Tangential inlet for whirlpool
-Thermowell for temperature sensor and thermometer

2. Main features of Bright beer tank
Bright beer tanks also called serving tanks, tax determination tanks or clear beer tanks(CBT), bright beer tanks(=BBT) or maturation or conditioning tanks. These tanks are used for the storage of the beer prior to being served or packaged. Depending on their application the beer serving tanks can be glycol jacketed or can be located in a cold room.

For brewpubs serving is often done by pumping or pressurizing the beer toward the serving location.

The specification of bright beer tank
1)Design pressure 45psi(3bar); working pressure 15psi(1bar)
2)-Inner wall stainless steel 304, 3mm; -surface wall stainless steel 304, 2mm
3)-Insulation: polyurethane 100mm, dimple plate jacket, on side and bottom
4)-Top manway or side manway door
5)-Carbonation system with micron stone
6)-Solenoid valve, pressure relief valve(safe valve),Pressure gauge
7)-Temperature sensor well
8)-CIP arm and 360 degree rotationg cleaning ball

-------------------------------------------------------------------------
3. Cooling Unit
1.Insulated glycol water tank with copper coil
2.High efficiency chillers or refrigerators with fryon to supply cooling energy
3.Sanitary centrifugal pump for glycol water recycle among tanks and heat exchanger
4.All pipes, fitting, insulation materials are included

4. Control Unit
1. Mashing Pump on/off
2. Temperature display and Auto/Manual heating Control for brewhouse tanks
3. Auto/Manual Glycol Water Pump control
4. Auto/Manuaul Chiller control
5. Temperature display and Auto/Manual Control for FVs and BBTs
6. Temperature display and Control for GWT and CLT
7. PLC with touch screen panel for special request