Wholesale "HX" embedded pipe

             Embedded grouting pipe

Detailed content use grouting pipe length of 50 m/roll (m)

Wall thickness (10 mm) producers/origin of Shanghai

Nominal diameter (mm) of 18 kinds of PVC hard pipe

                      The original reason:

The grouting pipe embedded in the new and old concrete cold joint, or any other structural joint, expansion joint, wall and partition around the pipes. Any hidden in the water leakage defects of these joints can be set through to the waterproof concrete joint seepage system in PVC port injection water activity on the surface of the slurry and seal leakage.

                           Rules:

Inner diameter inside diameter tolerance Each roll length, points

8 mm to 18 mm + 0.3 mm 50 m can be repeatedly grouting

Can be repeated use

Second-ranking optimal point

It can be repeatedly grouting, grouting is not restricted by time.

You as long as there is leakage occurs can be injected to the tube with slurry to fill the seal.

The external for HX grouting pipe diameter of 20 mm, the lining is PVC pipe, the pipe body have rules on the pulp out parallel arrangement of the holes.

Even HX grouting pipe lining is PVC pipe body, the middle is a layer of flexible rubber sealing strip, its role is to protect the pulp out hole, when grouting pipes embedded in concrete construction joint can prevent the tiny particles into the pipe body, and when the grouting pipe grouting, under the action of internal pressure and can open so that the liquid evenly to outflows, outer layer for woven mesh reinforcement.

Contact: Annabelle

Telephone: 15216698182/021-61172331

QQ: 1926413316