factory supply road pothole quck repaid cold mix

Cold Repair Patch

High-performance asphalt cold patch is the introduction of foreign technology research and development of a high-tech new road maintenance material, all-weather USES, and can in any weather and environment (or even in the water) repair all kinds of different types of road surface, pit slot, functional rut, finish, or the edge of the cement concrete, do not need to mix or bonding layer, immediately open the traffic.
Asphalt cold filling material is superior to ordinary cold filling material or traditional hot mix asphalt, emulsified asphalt mixture in terms of cost, quality and application, and it has been widely used and recognized in highway administration and municipal government all over the world due to its characteristics of simple operation, long storage, fast opening of traffic and environmental protection.

Main characteristics of high performance asphalt cold filler:
I.High performance asphalt cold fill provides a quick and permanent solution for your potholes and potholes!
1. Applicable to any weather and environment
It is not affected by low temperature, rain and snow, etc., and can repair pits and grooves in time under the harsh environmental conditions of rain and snow. The construction temperature can be used before -25℃ to 50℃.
2. Easy to operate
There is no need for special tools and equipment, nor special technology, the material can be taken at any time, can be directly poured into the pit (need to repair area), with the car wheel rolled a few times or with the impact compaction can be open to traffic.
3. High performance repair materials
The cold filling material of high performance asphalt has strong anti-aging property, and the service life of the repaired potholes is more than 15 years, and it is not easy to crack and other adverse phenomena.
4. Reduce maintenance cost
The high performance asphalt cold filler can repair the potholes in the pavement in time, regardless of the weather. Under the influence of the size and quantity of the pit, there is no need for heating and stirring. It can be taken as needed according to the actual amount. The remaining materials can be continued to be used without waste and can be truly utilized 100%.
5. Low VOC, green environmental protection products
During the production and construction of high performance asphalt cold filler, there will be no black smoke and waste of asphalt, which is beneficial to protect the environment. Besides, it can timely repair pits and grooves, keep the road smooth and beautiful, ensure the road smooth, reduce the number of road repair and workload, and extend the service life of the road.

6. Wide application
High performance asphalt cold filler has good adhesion with asphalt concrete, cement concrete, metal surface, wood surface and other different substrates, which can be widely used in the repair and maintenance of highways, general highways, municipal highways, parking lots and facilities, airports, bridge expansion joints and other pavement.
7. Open transportation immediately
The area repaired with high performance asphalt cold filler does not need to be closed to traffic, and can be opened to traffic immediately, greatly relieving the traffic pressure caused by road repair construction
8. Warranty period
It can be stored at room temperature and unopened for 2 years. After opening, when the high-performance quick repair material is not used up, it can be sealed for next use.

I. What grades of mixtures should be used for different depths and areas of the pit?

Dosage description:
60kg quick repair material can repair 1m2 x 25mm deep pit groove. High performance quick repair material density is 2.4 tons /m.
(2) For the deep pit groove, it is recommended to fill every 50mm and compacting.