Hydrophobic Polyurethane Grouting

                               The product description
1. It has good hydrophobic properties, high chemical stability.
2. Have greater penetration radius and solidification of volume ratio, chemical reactions under the influence of water releasing carbon dioxide, a gas pressure to push deep mortar crack spread, consolidation will form the toughness.
3. Acid, alkali and organic solvent, resistance to chemical corrosion.
4. Coating is smooth, wear-resisting, not moldy.
5. The cohesive force of cement and other building materials at the local level.
6. Adhesive viscosity and solidified grouting speed can be adjusted according to the needs of the project.
                             The composition
1. Polyether polyols, isocyanate and various additives.
Recommended long-term water or intermittent water (time)
2. Pools, water tower, basement, accommodation and other buildings of caulking plugging waterproof and anticorrosive coating.
3. Metal and pipe wall corrosion of concrete and steel structure anticorrosion.
4. The structure of the underground tunnel, foundation reinforcement and ground dust.
5. The building distortion seam, construction seam, cracks and steel structure.
6. Port, wharf, wharf, power plant leaks and DAMS, curtain grouting reinforcement.
7. Geological drilling plugging and protection, selective water plugging of oil and water gushing water in mines, and so on
8. Binding and enhance all kinds of building materials.
                      The typical performance indicators
Project technical indicators
Look pale yellow or brown transparent viscous liquid
The density of 1.0 ~ 1.1 g/cm3
Viscosity, mpa. 200 ~ 200
Coagulation time dozens of seconds to a few points
The rate of inflation, % 1000 or higher