Factory supply HX - 4200 chemical grouting machine

                       HX - 4200 chemical grouting machine

     4200 chemical grouting electric vacuum diaphragm pump, electric pump for one-component grouting and spraying operations. Pump imported from Italy, excellent performance, durable. Cattle head/butter/yellow nozzle/butter/butter filling head rubber products

  The consumption of butter filling head, working hours) (not including the traditional screw, the compressive strength can reach more than 10000 psi, working hours, four claw type quick connect province pharmaceutical rubber extrusion pressure rapid expansion, four claw will closely contains an attachment grease nipple, rubber has a special rubber material (high voltage), the effect of the high pressure flattening deformation of the rubber head injury caused by drugs.

USES: mainly used for the connection between the high pressure pipe and high pressure water needle.

                             Note

1, butter, head of the rubber mat under the influence of high pressure, long time will hurt.

2, due to the solvent corrosion chemical grouting material, also can damage.

3, due to the cleaning solvent, oil in the cylinder pad will damage due to corrosion.

Grouting, the discovery of oil in the cylinder gasket is broken, need to change in a timely manner.

4200 chemical grouting electric pump has the following features:

Mobile; Strong, easy to carry and maintenance;

Can work under tough conditions, including high temperature;

Capacity for power security, pump system, can automatically stop;

Pump body the use of special steel, material corrosion.

                       Technical parameters

Dynamic type single-phase ac power supply (220 V / 50 hz)

The rated power 1 HP (0.735 kw)

About 19 kg

Maximum working pressure of 20 Mpa

The pump efficiency of 2.5 litres/minute (14 Mpa pressure)

Important: before use, please read and understand the safety measures

1, the material of the pump if injected into the skin, can cause harm, not to the injection head to any part of the body.

2, if there is any place need to clean or loading and unloading, must turn off the power supply and relieve internal pressure pump.

3, to ensure the stability of the power supply, the work must be grounded.

4, before work, must understand the material the safety performance of the pump.

5, make sure accessories, such as high pressure tube, connector, and so on, can work under pressure.