automatic film laminating machine with solvent free PU glue

Specifications

          G&Z group is a leading manufacturer and supplier in China specialized in paperboard and film laminating machines, and our machines have installed in many countries.

          SL-1020 PUR high speed automatic film laminating machine is a new type of film laminating machine, it works with solvent free PU glue, the advantages are:

 High efficiency, high quality, saving energy, lower production cost and environmental protection!!!

Saving Energy: Replace the heating and drying system of water based lamination,which can reduce the power consumption about 40KW.

High efficiency: this machine can run at the speed of 80~100 meter per minute.

High quality:
Composite technology of normal temperature can avoid the deformation of the film and paper due to the high temperature and high pressure.
Strengthen the fastness of lamination greatly,especially suitable for the spot color lamination of black or red.

Environmental protection:

Without solvent pollution of solvent based lamination; Without influence of dispersing agent in water based lamination. Adhesive has been approved by the FDA Food and Drug Administration, it is the authentic green and environmental protection lamination.

Low cost: Low glue-spread amount,2.0 to 3.0g/m2 only,adhesive cost can reduce 30%. 

SL-1020PUR high speed automatic film laminating machine

With solventfree PU glue

Sheet laminating machine for solventfree adhesives

Complete line for laminating paper and cardboard sheets with solventfree adhesives.

Suggested solvent-free adhesive to use:

Henkel PU glue: lioful 7515 ()

Lamination: at room temperature, no need heating, saving power.

Glue quantity applied: 2-3g per m2, saving glue greatly.

SL-1020PUR automatic film laminating machine consisting of:

-   Sheet feeder Mabeg

-   Sheet alignment with double sheet cleaning

-   Laminating unit with film unrolling, coating unit, laminating calender and sheet separator

-   PU glue supply system (PU glue pump)with 200L drum

-   Sheet stacker Mirus with blow-down system for sheet end

-   Data input for electronic guiding and control system

-   Touch panel operation                                  

-   5 glue distributor rollers

- Air compressor  

Technical data

Max. sheet size                                                                L 1200 x W 1020 mm

Min. sheet size                                                                   L   450 x W  350     mm

Sheet weight                                                                    100 - 600     g/m2

Installed power                                                                                    55     KVA

Power consumption (average value at 400 V, 50 / 60 Hz)    20 – 25   KVA

Film thickness                                                                            0.01 – 0.05 mm

Max. film width                                                                       1020     mm

Max. film roll diameter                                                            350     mm

Film roll core                                                                           3“ (on demand 6“)

Type of adhesive                                                                    Solventfree PUR

Coating weight                                                                        2,0 - 5,0     g/m2

Average coating weight                                                           2,5 - 4,0     g/m2

Working speed                                                                      approx.10 - 80m/min.

Working height                                                                      1100mm

Stack height with standard pallet                                            950 mm

Max. stack weight                                                                 1000 kg

Viscosity of adhesive                                                             approx.1500 ± 200 MPasat 80°C

Operating side

Left hand operation in feed direction.

Max. surrounded temperature   35°C

(In case of higher temperature additional measures for cooling have to be taken.)

Voltage

380v 50 Hz 3Ph (voltage variation of +/- 10% permitted. )

Running video: pls contact us!