Jacketed cylindrical conical brewery fermentation tank

Jacketed cylindrical conical brewery fermentation tank

The brewery fermentation tanks can be individually temperature controlled through glycol jacket and are

mostly equipped with accessories such as overpressure and under pressure valve, CIP cleaning jet, sanitary

sample valve, manhole,etc. The design of TBE fermenters is based on our vast beer knowledge and

especially the conical fermenter bottom and the fact that we combine fermentation and maturation in the

same vessel is very important. When calculating your fermenting and lagering capacity and configuration

sufficient time for fermenting and lagering to produce quality beers must be taken into consideration.

Brewery fermentation tank is called CCT’s(Cylindrical Conical Tanks), FV’s(Fermentation Vessel), primary

fermenter unitanks as they are used both for fermenting and lagering. Fermenting is the process during which

the yeast transforms the wort into beer. Lagerings takes place after fermenting and is the time given to the

beer to stabilize and age after fermenting.

The brewery fermentation tank lower than 1000L:

The brewery fermentation tanks exceed 1000L:

1000L fermentation tanks:

3000L Fermentation tanks:

10000L fermentation tanks:

1. Welding: We abandoned the argon gas cylinder but adopt The Central System of Argon to make sure the

TIG welding with pure argon gas shield. We also increase the using amount of gas when welding,

so the quality of the welding line is more higher.

2.Dimpling: We adopt dimple plate rather than belt for glycol jacket, since it can increase the cooling area and

improve the speed of cooling. The most important thing in brewing process is to avoid contaminating, that is to

say the most important thing in producing beer equipment is to polish the inside tanks to 0.4~0.6 μm without

dead corner.

3.Polishing: We use large-scale polishing equipment to polish the inside of the tanks -- all over the wall to

make sure there is no dead corner. And we adopted passivation and acid pickling which will make our tanks

with higher accuracy. You need not worry about there will be some bacterias remained after cleaning. 

Other products you may interest:

Stainless steel beer brewhouse equipment

1000 Liter stainless steel beer brewhouse 

Welcome to send us inquiry for detailed cost of the brewery fermentation tanks!