Three vessel 1000L brewhouse equipment

Three vessel steam heating brewhouse equipment for sale

Brewhouse equipment is various combinations of vessels, of course to achieve the same four steps mashing,

lautering, boiling, whirlpool, by special brewing intentions of brewer including wort output, wort gravity,sparging 

water,brews in certain time, brewing method etc.Tiantai Company accepts special design for these variations. 

The Brewhouse equipment can be single function or can also have a false bottom and spigot so that the 

sparging process can be done in the same vessel. Steam jacket design will allow The Tiantai systems are 

designed to do both decoction mashing and infusion mashing. The mash tun brew kettle is made out of 

stainless steel or copper.

Every Weld Blended and Finished to a Smooth Sanitary Finish

Stainless steel brewing platform & integrated stairs with adjustable foot pads

Stainless steel condensation stack.

Sanitary centrifugal pump for mash, wort or hot water transfer

Various speed agitator and rake for efficient lautering and spend grain removing

High Efficiency multi-pass plate type heat exchanger with thermometer and aeration device

Control panel in stainless steel with digital control and readout to programmable optimized water temperature

V-Wire False Floor Included in Mash/Lauter Tun – virtually guarantees consistent wort flow

Compact- Space Saving and flexible Brewing Configurations

Available in Steam or Direct Fired

Standard Thermometers and Thermawell Adapters

• you can enjoy our free consultation service any time
• you can let us help you plan and design your brewery project if you don't know how to do it quite well
• you will be free of charge for our debugging the brewery equipment to get it work perfectly
• you can decide that which port the goods will arrive at
• you will be trained how to maintain and operate the brew system personally if you are not good at it
• you will learn some new beer production techniques from our professional brewer
• you will have our words: 
• Provide 36 months complete warrant for main parts and life-time maintenance service;
• The seller is responsible for the nature damage of the machinery in the 
• warranty period except for man-made damage. 
• All spare parts and wearing parts are attached with the machinery for free; 

2.Dimpling: We adopt dimple plate rather than belt for glycol jacket, since it can increase the cooling area

and improve the speed of cooling. The most important thing in brewing process is to avoid contaminating,

that is to say the most important thing in producing beer equipment is to polish the inside tanks to 0.4~0.6

μm without dead corner.

3.Polishing: We use large-scale polishing equipment to polish the inside of the tanks -- all over the wall to

make sure there is no dead corner. You need not worry about there will be some bacterias remained after

cleaning.Some other manufacturers may not pay enough attention to the polishing, even some have no

polishing machine.

Some other products you may interest as below, please click the links:

1000L micro brewery equipment for sale

2000L beer brewing system with CE

Welcome to send us inquiry for detailed cost of the 1000l brewhouse equipment!