Home > Products > Slew Drive > 14 inch slewing drive for solar tracker
14 inch slewing drive for solar tracker
- 3000 Set / Sets per Month
- Any port in china
- T/T Credit Card Other
You May Like
Product Details
| Place of Origin | Beijing, China | Brand Name | TITANHORSE | |
| Model Number | A14 | Type | Other, Radio, Slew Drive |
Product Description
Slewing drive for solar tracker and other fields
Enclosed slewing drives are the most popular model of Titanhorse’ slewing drives and can help power movement in machinery such as wind turbines, military equipment, digger derricks, solar trackers, medical equipment, forestry, waste management and industrial positioners. The housing fully encapsulates all the drive components such as the double enveloping worm gearset, planetary gearing, and turntable bearing, such that they have total protection from the elements. The Enclosed Drive is also advantageous if you’re mounting inside so as not to see the parts in motion, or to avoid injuring workers working in close proximity.
Slewing drives are ideal for jobs that require both load-holding and rotational torque from the same gearbox. The fully-enclosed comes with Titahorse’ patented hourglass worm technology, or cone drives and double enveloping worm gearsets where required, for maximum load-holding and efficiency. Each size is rigorously tested for reliable performance, with base model sizes producing 6kNm to 2200kNm of holding torque, 200Nm to 630kNm of output torque, 500Nm to 2710kNm of overturning moment load capacity, and gearbox reduction ratios of 30:1 up to 156,600:1.
Introduction
Slewing drive is consist of slewing bearing,worm shaft,housing,bearing,motor and so on. Motor drive the worm shaft, the outer ring of slewing bearing will rotate, the outer ring output the torque through flange while the inner ring of slewing bearing is fixed in housing.
Friendship Recommendation
- Vertical installation
It is advised to mount the slewing drives referring to attached drawing upside in solar applications for better protection.
For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better protection.
- Horizontal installation
It is advised to mount the slewing drives upside down on the azimuth axis in solar applications for better protection and add protection for the elevation axis.
For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better protection.
Generally, we use the standed wooden case to shipping slewing drive.
Contact Us
- Beijing Titanhorse Industry & Trading Co., Ltd.
- Contact nameWendy Dong Chat Now
- Phone86-10-63870478
- AddressRoom 5033, No. 9 Building, No. 16, Fengguan Road
Product Categories
New Products
-
9 inch hourglass worm slew drive
-
Solar panel slew worm drive
-
14 inch solar tracker slewing drive for concentrate solar power
-
7 inch slew drive for inclined single photovoltaic tracking station
-
3 inch dual slew drive for solar tracking system
-
5 inch dual slew drive for solar tracking system
-
DA7 Solar tracking slew drive
-
7 Inch slewing drive for Solar tracking system slew worm drive
-
TItanhorse 7 Inch Dual axis slew worm drive
-
Slewing bearing
-
Hot Slewing Drive Worm Drive for parabolic dish solar tracker
-
solar tracker slew drive
Popular Searches
- rooftop
- Brackets
- Mount Bracket
- Support Bracket
- Solar Panel Mount Bracket
- Mount Accessory
- Screw Pile Foundation
- Rail System
- Solar Tracking System
- Roof Hook
- ground mount
- solar carport
- mounting brackets
- galvanized bracket
- adjustable bracket
- ground
- Roof Boxes & Roof Racks
- Solar Panel Mounting Frame
- Aluminum Bracket
- Flat Hook
- Mount Hook
- t5 bracket
- tracker system
- bipv module
- solar bracket
- Panel Channel
- Aluminum Rail
- solar tracker
- slewing tracking
- solar tracking
Recommended Products
- 2*26 photovoltaic array tracking solar bracket
- household sun-tracking solar bracket
- NSPV Patent design Solar Photovoltaic NEHP edge connector PV Panel NEHP01 junction box
- ShuoBiao source factory of photovoltaic carports
- Motor control system for flat single-axis tracking bracket
- Small photovoltaic solar charging carport Have a factory
- Solar Cell PV Round Soldering Ribbon Production Line For Making Round Ribbon
- Solar Cell PV Round Soldering Ribbon Production Line For Making Round Ribbon
- REOO Manufacturering Solar Cell Stringer Robot Laying Up Machine With Positioning Camera for Solar Panel Production Line
- REOO Manufacturering Solar Cell Stringer Robot Laying Up Machine With Positioning Camera for Solar Panel Production Line
- Full Automatic High Speed Solar Cell Stringer Laying And Bussing Integrative Machine
- REOO Solar PV Round Ribbon Solar cell Tabber And Stringer Machine For Assemblying Solar Panel
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Solar & Renewable Energy > Solar Brackets
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Wendy Dong
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile