Home > Products > Slew Drive > Wind Turbines Swivel Slewing Ring
Wind Turbines Swivel Slewing Ring
- Any port in China
- T/T
You May Like
Product Details
| Place of Origin | Shandong, China | Brand Name | Titanhorse |
Product Description
Specifications
1.Usage:spare parts for solar tracker or engineering machinery etc2.Axis: single/dual axis
3.Size:from 3 inch to 25 inch
Our Company provides four main types of slewing bearings, as shown in the following figure:
Single-row four-point contact ball series 01
|
Single-row crossed roller series 11
|
Double-row ball series 02
|
Tri-row pin roller series 13
|
Our Company can also design and manufacture other types of slewing bearings according to user’s needs, e.g. double-row ball slewing bearing, ball-pin combined slewing bearing, and light-weighted slewing bearing, etc.
For detailed drawing, please contact us directly.
Detailed Pictures
Production Process
Certification Show
Application
Ø History
l Headquarter founded in the 1980s as a state-owned enterprise, reformed to be one limited liability company in 2005.
l Start to produce slewing ring in 1995, have own brand name for slewing ring.
l Four subsidiaries belong to the headquarter: Ring mill plant, Slewing ring plant, Wheel hub plant, Beijing Titanhorse International Trade Dept.
Ø Company Scale
l Total area: 100,000sq.m
l Factory: 60,000sq.m
l Office: 7,000sq.m
l 700 employees
l Lines of product: forged raw rings (The raw material of slewing ring), Slewing rings, Wheel hub
Ø Production Scale
l Slewing ring 50,000pcs/month
l Ring/flange 8,000pcs/month
l Wheel hub 20,000pcs/month
Ø Unique Advantage
l 6 series of slewing ring, the raceway diameter ranges from 200-5,000mm
l Germany 5S standard site management and QC management engineering standards
l ISO9001:2008, OHSAS18001:1999, ISO14001:2004
Operation & Maintanence
Suitable lubrication is necessary for durability of raceway and gear. Lubricating grease improves capability and service life of slewing bearing, while working condition, e.g. load, temperature, speed, and vibration, determines lubricant selection.
Characteristics of recommended lubricant for slewing bearing:
² Lithium base grease
² Minimum viscosity of base oil: 150 mm2/S
² NLGI consistency grade: 2
² Anti-friction and extreme pressure additive
² Working temperature: -300 Ca+1200 C
² Four-ball test: Clinkering load STMD 2596 (NT24)>300
² Maximum NDM value (revolving speed x raceway center diameter)
ü For ball slewing bearing=60000
ü For pin roller slewing bearing=30000
Lubricating grease compatibility table
According to our experience, the lubricating greases listed in the following table are compatible with each other and with all parts of slewing bearing. Any other grease which is deemed compatible with any of the lubricating greases recommended by the Company is usable. However, molybdenum-containing disulphide MOS2 is strictly prohibited.
Grease for raceway of slewing bearing |
Lubricating grease designation |
Grease for gear | ||||
| Aralub HLP2 | ARAL | Aralub LFZ1 |
| ||
| Rhus L 474/2 | MOTUL/bECHEM | Berulit GA 400 |
| ||
| Energrease LS-EP2 | BP | EnergolwRL/GR 154 GS |
| ||
| Grease LMX | CASTROL |
| |||
| Epexa2/Epexelf2 | ELF | Cardrexa DC1 |
| ||
| Beacon EP2 | ESSO | Surret Fluid NX |
| ||
| Mobilux EP2 | MOBIL | Mobilgear OGL 007 |
| ||
| Retina EP2-Alvania EPLF2 | SHELL | Malleus GL 205 |
| ||
| Multis EP2-Lical EP2 | TOTAL FINA ELF | Ceran AD |
| ||
This table is subject to update by manufacturer.
Removal of Common Faults
Difficult turning of slewing bearing
Every slewing bearing goes through strict inspection and test run before being released from plant, so all of them are acceptable products. As the slewing bearing has pre-tightening force on its sealing face and frictional force of the sealing face should be overcome for turning, it’s normal that certain starting moment is needed when it is turned.
In case of clamping stagnation in turning, the following method should be taken to remove the trouble:
Case |
Cause analysis |
Troubleshooting methods |
Inflexible idling of new product | The slewing bearing has been stored for long time (e.g. over a half year) or the ambient temperature is low, which results in less liquidity of the grease inside, leading to inflexible operation. This case is prominent in cold regions and in winter. | After force is exerted, if it works well without any abnormal sound, it can serve for normal serve, but new grease should be filled until it is oozed from the seal. If operation is accompanied with any abnormal sound, check whether there is any damage caused during transport or storage and feedback the information to our after-sale service department for a solution. |
Inflexible operation after installation | The mounting surface of the main machine does not match well with that of the slewing bearing, resulting in that after installation, axial clearance of the slewing bearing can’t compensate for deformation of the slewing bearing, raceway of the slewing bearing is distorted, and the roller moves with difficulty in raceway (sometimes with abnormal sound). |
Rework mounting surface of the main machine to make it in compliance with the requirements; or treat the surface by filling in plastic or partial washer. If flatness is still unacceptable after completion of surface treatment, try to exchange for a slewing bearing with larger clearance. |
Bad gear engagement is caused by failure to adjust gear backlash according to radial top point of gear pitch circle (three teeth marked with green paint). Deformation is caused by compressing the slewing bearing at the top point, resulting in difficult turning or abnormal sound. | Adjust gear and pinion engagement and gear backlash again as required. | |
Impurities are jammed in the gear and pinion. | Check and be sure that gear and pinion engagement is free of impurities. | |
Inflexible operation in use | The sealing strip is broken, resulting in entry of impurities into raceway. |
Replace sealing strip or take effective sealing protection measures, e.g. installing guard plates. |
Failure to lubricate it with sufficient grease periodically according to the maintenance requirement, resulting in abnormal wear and tear of raceway. | Lubricate it with sufficient grease until grease is oozed out from the sealing strip. It’s noted that every oil cup should be oiled, and operation should be kept in oiling, if possible. If wear and tear is serious, the slewing bearing should be replaced. If you continue using it in short time, lubricate it with more amount of grease until grease overflows, so that the scrap iron is discharged as most as possible. | |
Abnormal engagement between gear and pinion, with impurities or broken teeth | Remove impurities (if any); replace the slewing bearing, if there is any broken tooth. |
Contact Us
- Beijing Titanhorse Industry & Trading Co., Ltd.
- Contact nameWendy Dong Chat Now
- Phone86-10-63870478
- AddressRoom 5033, No. 9 Building, No. 16, Fengguan Road
Product Categories
New Products
-
9 inch slew drive worm gear for solar tracker
-
Double axis 7'' slewing worm gear for solar tracking system
-
Titanhorse wind turbine slewing drive of 3 inch
-
9 inch worm drive slewing ring
-
TItanhorse 9 LVA9 grease seal vertical type slewing drive
-
9 inch slew drive solar tracker
-
Titanhorse 5 inch single axis slewing drive for concentrated photovoltaic CPV solar tracking system
-
Wind Turbines Slewing Bearing
-
Solar tracking slew drive solar tracker
-
9 inch vertical slewing drive for inclined single photovoltaic tracking system
-
Hourglass slew drive price
-
Two axis 7'' slewing worm gear for solar tracking system
Quality Choice
-
Titanhorse 14 inch Opening hourse slewing drive for rotary table and rotating platform
-
Slewing drive for solar tracker
-
Solar tracker slew drive with hydraulic motor
-
14 inch solar tracker slew drive bearing
-
Dual axis slewing drive for solar panel
-
9 inch vertical slewing drive for solar tracker system
-
slewing drive for pv/concentrate solar power
-
Titanhorse 12 inch slew drive for concentrate photovoltaic CPV CSP
-
Titanhorse 3'' pinion slew drive oblique single axis PV tracking system
-
7 inch vertical pinion gear slew drive
-
3 inch single Slewing Drive with 24 VDC motor attached for solar tracking systerm
-
Slewing Drive with 12 VDC motor attached
Popular Searches
- rooftop
- Brackets
- Mount Bracket
- Support Bracket
- Solar Panel Mount Bracket
- Mount Accessory
- Screw Pile Foundation
- Rail System
- Solar Tracking System
- Roof Hook
- ground mount
- solar carport
- mounting brackets
- galvanized bracket
- adjustable bracket
- ground
- Roof Boxes & Roof Racks
- Solar Panel Mounting Frame
- Aluminum Bracket
- Flat Hook
- Mount Hook
- t5 bracket
- tracker system
- bipv module
- solar bracket
- Panel Channel
- Aluminum Rail
- solar tracker
- slewing tracking
- solar tracking
Recommended Products
- olar photovoltaic energy storage charging parking shed
- 2*26 photovoltaic array tracking solar bracket
- household sun-tracking solar bracket
- NSPV Patent design Solar Photovoltaic NEHP edge connector PV Panel NEHP01 junction box
- ShuoBiao source factory of photovoltaic carports
- Motor control system for flat single-axis tracking bracket
- Small photovoltaic solar charging carport Have a factory
- Solar Cell PV Round Soldering Ribbon Production Line For Making Round Ribbon
- Solar Cell PV Round Soldering Ribbon Production Line For Making Round Ribbon
- REOO Manufacturering Solar Cell Stringer Robot Laying Up Machine With Positioning Camera for Solar Panel Production Line
- REOO Manufacturering Solar Cell Stringer Robot Laying Up Machine With Positioning Camera for Solar Panel Production Line
- Full Automatic High Speed Solar Cell Stringer Laying And Bussing Integrative Machine
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Solar & Renewable Energy > Solar Brackets
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Wendy Dong
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile