Omron PLC CP1H-X40DT-D 4 Axis Position Control and Comprehensive Programmable Controller CP1H

Specifications

Omron PLC CP1H-X40DT-D 4 Axis Position Control and Comprehensive Programmable Controller CP1H
  The CP1H-X with pulse outputs for 4 axes.
  The CP1H-Y with 1-MHz pulse I/O.
  The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O.
  Pulse output for 4 axes. Advanced power for high-precision positioning control.
  High-speed counters. Differential phases for 4 axes.
Easily handles multi-axis control with a single unit.
  Eight interrupt inputs are built in. Faster processing of approximately 500 instructions speeds up the entire system.
  Serial communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.
Note: 1. CP1H PLCs are supported by CX-Programmer version 6.1 or higher.
2. Purchase a separately sold Option Unit if you will use RS-232C, RS-422A/485, Ethernet, or LCD.

CP1H-X CPU Units Inputs  24  Outputs 16
Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes
Pulse outputs: 100 kHz, 4 axes (Models with transistor outputs only)
CP1H-X40DT-D; DC power supply; Transistor output (sinking);

CP1H-XA CPU Units Inputs  24  Outputs 16
Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes
Pulse outputs: 100 kHz, 4 axes (Models with transistor outputs only)
Analog inputs: 4; Analog outputs: 2
CP1H-XA40DT-D; DC power supply; Transistor output (sinking);
CP1H-XA4ODT-D; CP1H-XA4ODT;
Options for CPU Units
CP1W-CIF01; RS-232C Option Board;
CP1W-CIF11; RS-422A/485 Option Board;
CP1W-CIF12; RS-422A/485 (Isolated-type) Option Board;
CP1W-CIF41; Ethernet Option Board;
CP1W-DAM01; LCD Option Board;
CP1W-ME05M; Memory Cassette;

Expansion Units