Gold Refining Machine Flotation Separator

Specifications

I. gold refining machine  flotation separator  Introduction

Gold Separator is applicable for the separation of nonferrous metal and ferrous metal. It is also

used for separating nonmetal, such as fluorite and talcum.

Each unit of flotation consists of two tanks. The first tank contains feeding pipe for sucking the pulp.

The second tank is auto flowing tankor direct flowing tank. There are middle chamber between the

two tanks. Below, the pulp is two connected together. The impeller is on the lower part of main shaft .

There are belt wheel on the upper part of main shaft for motor driving. The air is sucked by feeding

pipe. The pulp level in each unit is adjusted by sluice gate. There are cover plate and air cylinder
above the impeller. There is hole in the air cylinder for install feeding pulp pipe. The middle pulp pipe

is used for pulp recycling and the size of hole can be adjusted by tension rod.

The gold machine is the machine which completes the flotation process directly. It consists of

stirring area, separating area and foam area from bottom to the top. The separating are is the key

area for pulp to form the mineralized foam. So the sufficient cubage and hight shall be ensured.

And there shall be form obvious boundary from stirring area.

II. gold refining machine flotation separator Structure

Gold  separator is made up of flotation and 

additional equipment (agitator bath, reagent feeder).

III.   gold refining machine flotation separator  Feature

1. large air-absorption capacity

2. low energy consumption

3. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.

4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent.

5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it.

V.   gold refining machine  flotation separator Technical datas

gold separator,gold separator flotation separator

I. packaging : export standard or as requested.

II.shipping:  as customer's request.

gold separator machine

Before sales service:

Provide the program design and technological flow design; choose the most suitable equipment  for customer; 

design and manufacture products according to customer's demands; provide training of operational technicians 

for customer.

Sales service:

Finish the equipment inspection with you; assist you in drawing out the construction scheme and detailed flow.

After sales service:

Send technicians to installation site for the guidance, equipment adjustment and training.

Certificate of honor
CE certificate		ISO9001-2000
BV certificate		China Top  enterprises
		China credit  example  certificate

 

gold separator machine

Common malfunction and troubleshooting

flotation machine in the course of the malfunction occurred,treatment can be carried out in the following table.

gold separator machine

Please don’t hesitate to inform us:
1.What’s kind of your raw material? And the ore TEST REPORT?
2. Now your raw stone size?
3. What’s the capacity ? (T/H)
4. What’s the final ore concentrate grade request?
5. Others?

If possible,please send us some ore sample, we will do a test for you.