Hand-push Screeding Two-component Road Marking Machine

Specifications

 1. Engine: Japanese Robin 6.0 HP or Honda 5.5HP air-cooled gasoline engine (Option for electrical starting gasoline engine, diesel engine or liquefied gas engine).

2. Marking shoe: Welded charging bucket is made of special steel sheet that is impact-resistant and oxidation-resistant. The closed discharging hole adopts an extractable bedplate structure that can be opened and closed freely. The upper part is equipped with automatic stirrer filled with paint and hardener. Its standard configuration is 150mm (other sizes of this machine can be chosen according to different requirements of the users.)

3. Paint tank: Stainless steel or cold rolled, anti-oxidant tank equipped with erect type vane manual stirring device. Capacity: 100kg.

4. Glass beads bin: 15L capacity bin with windows used to check the quantity of glass beads in the bin timely.

5. Glass beads dispenser: An automatic quantitative dispenser that is synchronous with the swing system to ensure the dispensing evener, exact and more economical.  

6. The technical parameters of the driving system, driving speed, maximum climbing capability, chassis, rubber wheel, rear wheel direction finder, the guide rod and the handle bar are basically the same as those of TT-RYZ-I.

7. Marking width: Specifications of the marking shoe are changeable (100, 150, 200, 300mm, etc.) according to the construction needs. 

8. Size & Weight: 1200mm (L) ×850mm (W) ×120mm (H). 235Kg (equipped with 150mm marking shoe).