Truck Mounted Cold Plastic Road Marking Machine

Specifications

    Truck Mounted Cold Plastic Road Marking Machine

    1.Engine :Japanese Robin ,Honda or other same power original imported 13(16Hp)
Hp four-stoke air-cooled gasoline engine .
    2.Paint pump :Equip with single (II type)pump one colour
double pumps double colour double vertical type plunger pumps ,strong abrasion
resistance ,easy maintenance .Single pump max flow20.L/min.Max pressure :
20Mpa,(working pressure 8-12Mpa).Operate singleor double to do the single or
double spraying work. The II type can operate simultaneously , three or four
guns to do single or double colour spraying work.
     3.Structure: Integral high strength welding structure .Engine drives hydraulic
pump to work ,pass by hydraulic system ,and then drive cylinders to work .The
whole system operate very easily .Control system at hand control very easily
during construction.
    4.Spraying width :I type 100-450mm;II type 100-1000mm.
    5.Glass beads dispensing (spraying )system :Equip with glass beads dispenser(A
type)or glass beads spraying system (B type).
    6.The technical indices and parameters of control system ,pre-spraying
system ,spray guns, gun bracket and guide arm device are the same as theseof
TT-CZ200-IA/B.
    7.Available paint: Water based or solvent paint .
    8.Paint tank :Equip with double large tanks (150kg*2) with hydraulic automatic
stirrer .
    9.Cleaning system :Equip with clean device for the whole spraying system ,
which makes the cleaning easy and fast.
    10.Size . Weight(double colours):
    IB type 1040mm(length)*980mm(width)*1460mm(height)430Kg.
    IIB type 1120mm(length)*1020mm(width)*1240mm(height)540Kg.
Option for portable hand-push road marking machine to mark special marking such
as .pedestrian . Parking and lane markings