Sitting Type Airless Road Line Marking Paint Machine

Specifications

    1.Engine: Original imported Honda or Robin 18Hp air-cooled gasoline engine.

    2.Driving system: The original imported variable speed transmission system with automatic brake device, which can be freely operated to forward, back off or stop(HTS);The left and right wheels with differential driving device make the curve driving and turning flexible and convenient. The manual brake system makes the running safer.

    3.Driving speed:  0-20km/m.

    4.Max climbing capability: 15°.

    5.Micro-electronic control system: This system has four marking ways (also can makes personality design according to the standard of customer). Spray gun controller can freely change the guns between the single and double spray guns.

    6.Chassis: Firm welding frame, and surface has been chrome-plated , galvanizated or sprayed coating with corrosion resistance, equip with high speed type imported bearing to ensure the whole machine  lighter and more convenient.

    7.Rubber wheel: The left ,right ,front and back wheels are gas-filled pressure resistance vacuum ones, the diameter is 400mm.

    8.Guide rod: The guide rod is easy to operate, which can be freely adjusted to up, down, left and right.

    9.Illumination and alarming function: Install with high intensity illumination lamp, which makes the work at night convenient . The alarming lamp with adjustable flicker frequency greatly improves the safety of work at night.

   10.Paint pump: Equip with single 20L/min or double 12.5L/min piston high pressure airless pumps, which makes sure the big flow and stable pressure. Max pressure 20Mpa(Working pressure 10-15Mpa). Max flow:20L/min.

   11.Paint tank: The capacity is 300kg.There is sieve in the tank.

   12.Spray gun: Equip with three new type pneumatic  spray guns and one hand spray gun with lengthening pipe for spraying special sign like arrow and letter. Hard side columnar reverse wastewater nozzle(30/20) makes the on-spot discharging easy and convenient .The non-arc nozzle ensures the base line collimated.

   13.Available paint: for the spraying of cold solvent ,water based road marking paint.

   14.Spraying width:100-600mm.

   15.Glass beads SPRAYER: The parameters are the same as that of  TT-DRZ-I.

   16.Glass beads bin: Bin with windows can check the quantity of the glass beads in time. The capacity is 25kg.

   17.It can finish the pre-marking synchronous with marking line, which doubled  improves efficiency.

   18.Size . Weight:3800mm (length)×1800mm(width )×1650mm(height ) 750kg.

    Option for special trailer chassis ,convenience for transportation.
    Option for portable hand-push road marking machine to mark special markings, such as pedestrain .Parking and lane marking.