AC DC 24V Single Channel Power Surge Protector Lighting Protector with 2Pin Connector

1. Description:

Easy to install, and can be used to protect the data transmission of signal controlling system, such as: computer communication system, CCTV system, access control system, FS system etc. Avoid the devices from damages of the lightning overvoltage, electostatic discharge,or induced overvoltage. Design with the signal ground connection terminal block wire to protect the your devices work well 2. Features:

Large discharge current capacity, multi-level protection, swift response speed and small insertion loss. 3. Technical Parameters: Specification: Single Channel DC 24V Power Surge Protector Functional Protection: 24V DC Power Material: Aluminium Alloy Connector Type: 2Pin Insert Loss: 0.3dB Response Time: <0.5ns Working Temperature: -60 Degree - +190 Degree Max Discharge Current: 10KA Dimension: 48*25*25mm Work Voltage: 24V Limite Voltage: 47V 4.Installation and maintenance: In means the input end while out means the output end; the input end is connected with the transmission line while output end is connected with the equipment. A protection device is connected at the equipment end of signal output source and input end of protected equipment in a serial manner. The earthing guide wire is connected with the earthing busbar or lightning-proof system reliably. Special maintenance is not needed for the protection device; please replace immediately in case of damage by high voltage or lightning.

Notice:If you need an adapter 12V/220V power supply, please go to the link below:1.DC-12V ,2.DC-220V

Product Pic: