Best Seller Hot Metal Detector used for Steel Mill

Best Seller Hot Metal Detector used for Steel Mill

1. Rear Bar Display

The rear bar display allows the user to clearly establish the amount of received IR both from the background metalwork and the bar being detected and thereby establishing the correct trip level required. This display also allows the user to align the Detector from a low energy source such as a flashlight, which normally would be insufficient to switch the Detector. Adjustment of both the threshold and the response time is also clearly defined by this bar.

2. Housing Specifications

Housing: Aluminum AL6, Oven baked blue paint

Housing Rating: IEC IP66, DIN, 89011

Weight w/o Cable: 1.9 Kg (4.2lb)

Connector: IP66 with connected Plug/Socket

Cable Length: 1.5 M Standard up to 15 M available

Cooling: Air Cooled & Air Purged or Water Cooled & Air Purged

3. Air & Water Specifications

Air Pressure: 1 cu ft./min at 5 PSI for normal conditions

                    5 cu ft./min at 15 PSI for severe conditions

Water Pressure: 5 to 10 PSI, 40 PSI Maximum

Water Volume: Regulate between 0.2 - 0.3 liters/min.

Water Temp.:

For Ambient Temperature up to 70°C use ambient water below 20°C

For Ambient Temperature up to 80°C use water chilled up to 10°C

4. General Specification 

We offer Products for Industrial Application

We are your partner for providing solutions in different industrial branches. Namely the metals industry, car, chemical, paper, ceramic and other industries such as mining or warehousing.

Contact us

If You are interested in cooperation or need some more information, please contact us.