Germany- Quality Hot Metal Detector used in Steel Mill

GERMANY-QUALITY HOT METAL DETECTOR MSE-HMD85

USED IN STEEL MILL

1. General Description

The MSE-HMD85 Hot Metal Detector is a robust sensor activated by the infra-red radiating from the hot product. Impervious to water or steam it is built to withstand the harshest of environments. The product is detected via a highly stable InGaAs Photodiode to ensure detection regardless of heavy water and steam and incorporates filtering that removes the visible spectrum to minimize sensitivity to extraneous light. The precise 0.5° x 25° lens ensures accurate detection of strip and accommodates bar bounce.

MSE-HMD85 Hot Metal Detector is the economical choice. Now there is no need to stock various Detectors for each location. Costly multiple inventory can be

replaced by one Detector.

2. Rear Bar Display

The rear bar display allows the user to clearly establish the amount of received IR both from the background metalwork and the bar being detected and thereby establishing the correct trip level required. This display also allows the user to align the Detector from a low energy source such as a flashlight, which normally would be insufficient to switch the Detector. Adjustment of both the threshold and the response time is also clearly defined by this bar.

3. Air & Water Specifications

Air Pressure: 1 cu ft./min at 5 PSI for normal conditions

                      5 cu ft./min at 15 PSI for severe conditions

Water Pressure: 5 to 10 PSI, 40 PSI Maximum

Water Volume: Regulate between 0.2 - 0.3 liters/min.

Water Temp.:

For Ambient Temperature up to 70°C use ambient water below 20°C

For Ambient Temperature up to 80°C use water chilled up to 10°C

4. General Specification

Welcome to Moduloc System Engineering

We produce optical instruments and sensors for industrial measurement and assist in setting up production of OEM products. Our German management and European standards permit good “German quality” of all products. Consulting in protection of investor’s rights from patent infringement is our advantage too. We plan to expand our production range and are looking for cooperation especially with European and American companies.

Contact us

If You are interested in cooperation or need some more information, please contact us.