We require spare parts for gas pressure reducers used in electric stations. Please provide detailed specifications and compatible models for industrial-grade components. The supplier should clarify technical parameters to ensure compatibility with our existing systems.

We require design and supply of steam boiler systems for LPG processing with the following specifications:  
1. Storage Bullets: 50 m3 mounded design, ASME VIII Div.1 compliant, 17-20 barg pressure rating, dual PRVs with changeover system, complete with level monitoring and safety features.  
2. Vaporizers: Water-bath type with 400 kg/h capacity base configuration or 200 kg/h modular setup, including safety relief systems and temperature controls.  
3. Full compliance with ASME B31.3 piping standards and NFPA 58 safety requirements for entire system integration.  
All components must include proper pressure regulation stages from 6-8 barg down to 0.1-0.3 bar burner supply.

We require a pump pressure test system capable of handling maximum pressure of 725psi (50 bars) with 1/2" NPT pressure hose connection. The unit should have 3.6 gallons tank capacity and operate within maximum temperature of 50°C (120°F). Required specifications include piston volume of 2.3 cubic inches, dimensions 28"x8.5"x9.5", and weight under 14lbs. Please provide RIGID Model 50557 (Catalogue 1450). Looking to purchase 2 units for leak detection in heating, potable water, fire sprinkler, compressed air, small bore pipe lines, and oil systems.

I need to purchase 1 set of open-cell spray polyurethane foam insulation system (A-side Isocyanate + B-side 500 type resin) and 1 set of closed-cell system (A-side Isocyanate + B-side Proseal LE/Foam-Lok 200 equivalent). Each set must include 2 component drums (total 4 barrels) with approximately 450 lbs per drum. The material should be compatible with Graco i30 machines and Fusion AP guns operating at 130°F temperature and 1000 psi pressure. Please provide:
1. Technical datasheets including density, R-value, fire resistance ratings, expansion rate, and VOC content
2. MOQ requirements
3. FOB Shanghai or CIF USA pricing
4. Sample availability for USA shipment
No rush contact - comprehensive technical specifications required before proceeding.

Require a custom-built misting system with below specifications:

Dual-Liquid Dosing:
- Two separate 5-20L concentrate tanks
- Automatic proportional mixing (1-2% per liquid)
- Integrated with main water line

Pump Requirements:
- Stainless steel plunger pump
- 50-70 bar pressure capacity
- Flow rates: 1L/min (20 nozzles), 3L/min (60 nozzles), 12-15L/min (300 nozzles)

Nozzle Specifications:
- Stainless steel/brass construction
- 3-10μm droplet size
- Anti-drip function

Control System:
- Digital/PLC controller with dosing ratio adjustment
- Programmable misting intervals and cycles
- Optional remote/app control

Compact design preferred (≤50cm x 60cm). Pre-filtration system required to prevent nozzle blockage.}

We are planning to establish a new car wash facility and require complete equipment solutions. Our main focus is on automatic car wash machines that can handle standard passenger vehicles. Need high pressure cleaning systems capable of removing tough dirt and grime. Also looking for foam spray systems that create rich foam coverage. Please provide equipment specifications and recommended configurations for a medium-sized operation. No used or refurbished equipment.

We are seeking preparative HPLC systems for pharmaceutical research applications. Please provide detailed specifications including column dimensions, flow rate range, and pressure limits. Systems must comply with current GMP standards and include maintenance documentation. Kindly specify available configurations and compatible solvent types.

We are looking to purchase expansion valves and ball valves for air-conditioning systems. Requirement details:
- Quantity: 250 pieces per size (multiple sizes required)
- Application: R22 refrigerant-based air-conditioning units
- Delivery: Before December 2023
- Budget: Flexible based on product quality and durability

Please provide specifications and compliance certifications for your valves. Material composition and pressure ratings should be clearly stated in quotations.

We require a complete wheel wash system for heavy-duty trucks and construction vehicles. Essential specifications include:
- 3100 l/min water pump capacity with 1.7 bar pressure
- Hot-dip galvanized steel frame and stainless steel nozzles
- Integrated clarifier tank (~20 m3) and automatic detection system
- 3×400V/50Hz power supply with CE compliance
- Minimum 15-ton axle capacity and 3500mm passage width

The pump must be from established brands with reliable spare parts network in EU. Please provide EXW and CIF (Skalica) pricing, lead time details, and warranty terms. Include Q-H curve documentation and technical compliance certificates.

We require Cam and Groove (Camlock) couplings for chilled water piping connections.  
Please specify:  
1. Available sizes in standard dimensions  
2. Material options (Stainless Steel or Brass preferred)  
3. Availability of shut-off valve variants  
4. Working pressure specifications  
Suitable for industrial chilled water systems in Bangladesh.

I need pressure vessel tanks with these specifications:
- Model: TY-06-100L
- Minimum 100L capacity
- SS-316 grade metal construction
- 450mm diameter & 940mm height
- 10 BAR minimum working pressure
- Interchangeable potable bladder membrane
- Red epoxy-coated exterior
- Floor-mounted type with 1.5" water connection
- Suitable for central heating systems
Please confirm availability and provide technical compliance documentation.

We require expansion vessels for fuel system application. Specifications required: 500L capacity with PN16 pressure rating. Initial order quantity: 4 units. Please provide product availability and technical specifications confirmation. Urgent response appreciated.

We require segmented tire molds compatible with CIMA RPU/2 curing press for hot retreading applications (bead-to-bead). Specifications needed:  
- Tire sizes: 195/80R15 (Bridgestone D680 tread pattern) and 205/75R16 (Michelin XC4S tread pattern)  
- 4-segment construction with standard steel/aluminum material  
- Polished finish and venting system  
- Engraving requirements: DOT code and mold code  
- Steam curing system compatibility  

Please provide technical specifications, pricing breakdown per size, lead time, warranty terms, and CIF/FOB shipping options. Initial order for evaluation with potential repeat purchases.

We require multiple hardware components for electrical cabinet systems, including auto-supported locks, stainless steel hidden hinges, wall-mounted hinges, chrome-plated round locks, M12 hook bolts, welding bolts (M6 and M8 sizes), bakelite handles, zinc alloy hinges with pressure pins, adapter rods, and caged nuts. Quantities range from 100 to 20,000 units across different specifications. Suppliers must provide precise quotations matching the listed technical parameters and material requirements.

We need to purchase high-pressure spray rings with 60-70cm diameter for cattle cooling systems. Each ring must accommodate 8 nozzles with 10-24 thread specifications.  
Require 5 pumps capable of servicing 14 spray rings per unit. The system will be installed on 90m-long fan rows with 7 rings per row. Please provide compatible equipment solutions and commercial offer.

I need tires
rubber thread
44/60 black and white 25000 ton

Looking to purchase 2 units of BALANCE, PRESSURIZED MUD MODEL,141 TRU-WATE - MFG: FIC - P/N# 100003565

Seeking complete wheel hub assembly for trailer application with the following specifications:
- 1 Ton per side load capacity
- Hydraulic brake system with mechanical parking brake
- Brake drum dimensions: 345mm OD, 295mm ID, 108mm height
- 5-bolt pattern with 150mm PCD
- Compatible with Toyota LC79 rims (285/75R16 tires)
- Must include: brake drum, cylinder, shoes, bearings, 4-bolt flange
- Exclude axle component

Certification requirements:
- ISO/TS 16949 or equivalent
- Anti-corrosion treatment
- Spare parts availability (bearings, shoes, cylinders)

Order details:
- Required quantity: 500 pieces
- Request FOB and CIF pricing
- Required production/delivery timeline
- Prefer ready-to-install units

We are seeking road sweeper attachments compatible with wheel loaders (front loaders). Required specifications include:
1. Core components:
  - Collector bucket/dustbin
  - Water spraying system for dust suppression
  - Side brush assembly

2. Technical requirements:
  - Dimensions and weight specifications
  - Hydraulic pressure/flow parameters
  - Brush material details

Please provide:
? EXW and CIF pricing
? Minimum order quantity (MOQ)
? Production timeline and delivery schedule
? Warranty terms and after-sales support
? Product catalog with technical datasheets
? Visual documentation (product photos/videos)

Include information about customization options for different loader models.

Require customized 3000 mm Motor-Operated Horizontal Butterfly Valve (MOV) with detailed specifications:  

- Type: Horizontal eccentric butterfly valve (double/single eccentric)  
- Size: DN3000 flanged connection (KS D 3578-F12 standard)  
- Materials:  
 ? Body: SS400 with full NBR rubber lining  
 ? Disc: GCD450 with NBR lining & 316L stainless seat  
 ? Shaft: ?280 mm STS 316L  
- Actuation: Electric actuator (Bernard ST70 equivalent)  
 ? 700 Nm torque, 415V 3-phase 50Hz  
 ? IP68 rating with manual handwheel  
- Design Conditions:  
 ? 3 kg/cm2 pressure at 50°C  
 ? Seawater corrosion resistant construction  
- Coating: 3-layer system (165μm total thickness, RAL9006 finish)  
- Certifications: MTC 1.1 with hydrostatic/leakage testing  

Please provide technical specifications compliance, production lead time, and commercial terms.

Require complete self-service car wash solution including:
? 6 manual self-service car wash bays with lance systems
? 1 technical room for housing pumps/control systems/chemical tanks
? 2 double vacuum units for customer interior cleaning
? Modular design for on-site assembly by local team

Technical requirements:
- Structure materials specification
- Power/water pressure requirements
- Dimensions of components
- Payment system options (coin/card)
- LED lighting availability
- Foam gun accessories

Logistics details needed:
- FOB/CIF shipping cost to Romania
- Production timeline
- Warranty terms
- After-sales support options

Prioritize latest technology with long-term performance durability. Installation support/remote technical assistance preferred.

Looking for lubrication pump with below specifications:
- Model: HBBX-050L
- Flow rate: 15 LPM
- Pressure rating: 10 kg/cm2
- Serial number: 18-15754
- Application: RM separator gear box
- Quantity required: 1 unit

Please provide:
1. Price quotation
2. Delivery timeline
3. Product certification details
4. Compatibility confirmation with RM separator systems

Looking for a medium size gravel titanium cycle frame with the following specifications:  
- Disc brake system  
- 36mm tire compatibility  
- Internal cable routing design  

Seeking 1 unit for purchase. Suppliers please provide:  
1. Detailed technical specifications  
2. Price quotation  
3. Estimated delivery timeline to Chennai, India  

Open to manufacturers specializing in custom titanium bicycle frames.

We are looking for hydraulic press machinery specifically designed for scrimber production. Please provide details regarding:  
1. Technical specifications (pressure capacity, heating system, platen size)  
2. Standard models available  
3. Minimum Order Quantity (MOQ)  
4. FOB pricing  
5. Lead time for delivery  

Suppliers with experience in wood composite/engineered timber machinery are preferred. Certifications and after-sales service terms should be included in quotations.