We are looking to purchase steel irrigation culvert pipes for agricultural water management systems. Please provide product specifications including available thickness options, section shapes (round/arch/box), and standard outer diameter measurements. Kindly share technical details regarding material grade and corrosion resistance features.

We require design and supply of steam boiler systems for LPG processing with the following specifications:  
1. Storage Bullets: 50 m3 mounded design, ASME VIII Div.1 compliant, 17-20 barg pressure rating, dual PRVs with changeover system, complete with level monitoring and safety features.  
2. Vaporizers: Water-bath type with 400 kg/h capacity base configuration or 200 kg/h modular setup, including safety relief systems and temperature controls.  
3. Full compliance with ASME B31.3 piping standards and NFPA 58 safety requirements for entire system integration.  
All components must include proper pressure regulation stages from 6-8 barg down to 0.1-0.3 bar burner supply.

We are a contracting company specializing in industrial refrigeration projects requiring carbon steel pipes meeting ASTM standards including A106, A333, and A53. Our current requirement focuses on seamless pipes and fittings originating from Ukraine or European countries.

Please provide quotation for pipes compliant with specifications ASTM A106 (high-temperature service) and ASTM A333 (low-temperature service). The materials will be used in boiler systems and heat exchanger applications.

We require manufacturers with valid certification documents and capacity to handle bulk industrial orders. Kindly include material test certificates and production lead time details in your proposal.

We require a pump pressure test system capable of handling maximum pressure of 725psi (50 bars) with 1/2" NPT pressure hose connection. The unit should have 3.6 gallons tank capacity and operate within maximum temperature of 50°C (120°F). Required specifications include piston volume of 2.3 cubic inches, dimensions 28"x8.5"x9.5", and weight under 14lbs. Please provide RIGID Model 50557 (Catalogue 1450). Looking to purchase 2 units for leak detection in heating, potable water, fire sprinkler, compressed air, small bore pipe lines, and oil systems.

We require a conveyor-based material handling system to integrate with existing rebar processing machinery. The solution must handle steel rods/pipes with length range 1200-12000mm and diameter 12-40mm.  

Key requirements:  
- Single conveyor line supplying 4 machine bays (cutting, cold forging, threading)  
- Buffer storage capability for continuous operation  
- Smooth material transfer and automated distribution  
- Compatibility with existing equipment  

Please provide:  
1. System design/layout with technical specifications (drive system, speed, load capacity, automation)  
2. Integration plan for current machinery  
3. Delivery timeline and commercial terms  

Vendors with experience in steel rebar handling systems are preferred. Customization options for precise operational needs are essential.

We're planning to visit manufacturing facilities and seek reliable suppliers for PVC piping systems. Please provide detailed specifications of your standard product range. Kindly advise minimum order quantities and customization capabilities for plumbing applications. We prefer manufacturers with international quality certifications.

We require complete foam glass manufacturing solutions with daily production capacity of 100 cubic meters. The facility should be capable of producing various forms including sheets, boards, slabs/blocks, and pipe fittings. Both continuous and batch processing methods are acceptable.  

Key technical requirements:  
- Compatibility with recycled glass cullet and virgin raw materials  
- Detailed process flow diagrams  
- Equipment specifications for full production line  
- Input/output ratios for material efficiency analysis  

Please provide essential technical documentation to verify production capabilities and process parameters. We prioritize systems that demonstrate operational excellence and global industry standards compliance.

We are seeking reliable suppliers of PPR pipes and brass fittings for industrial mining applications. Require detailed product specifications and quality certifications. A factory visit is essential to verify production capabilities before finalizing orders. The products will be used in water supply systems for mining operations in South Africa.

We require magnetic level gauges with the following specifications:  
- Total length: 2280 mm  
- Chamber connection material: 316L stainless steel  
- Socket weld flange with pipe nipple configuration  
- Specific gravity: 0.955  

Mandatory requirements:  
1. OEM compliance with ABB K-TEK Corporation specifications  
2. Model: KM26S/SS6/W2SWSWD5 SWR11/SWR151/P5/M2G7C/IH2/2280 MM  
3. Valid origin certificate and calibration documentation  

This procurement is for replacement in HRSG blowdown tank systems. All technical parameters must strictly match our existing operational equipment.

We require Cam and Groove (Camlock) couplings for chilled water piping connections.  
Please specify:  
1. Available sizes in standard dimensions  
2. Material options (Stainless Steel or Brass preferred)  
3. Availability of shut-off valve variants  
4. Working pressure specifications  
Suitable for industrial chilled water systems in Bangladesh.

Require 3 customized laser cutting systems with below specifications:

Project 1 - Plate Processing:
- 15,000*2,500mm working area
- FSCUT 9100 control system
- FACUT cutting software
- Welded steel frame with aluminum portal

Project 2 - Orbital Pipe Cutting:
- Handles tubes up to 650mm diameter
- 12m maximum cutting length
- Raycus 30kW laser source
- BOCI BLT481 cutting head
- TUBEPRO/TubesT software

Project 3 - Profile Processing:
- 28,000*3,000*1,500mm working area
- Bochu FSCUT 9200 control system
- TEKLA compatible software
- Yaskawa servo drives
- Special 12m profile support system

All machines require detailed technical specifications and competitive commercial offers. Budget constraints not disclosed - focus on technical compliance and value proposition.

Seeking exhaust pipe replacement for Yamaha CY80 motorcycle.  
Current exhaust system became abnormally hot and produced unusual sounds after sustaining damage.  
Require compatible aftermarket exhaust solution without brand preference.  
Budget approximately 20,000.  
Please provide recommendations suitable for this specific motorcycle model.

We are Flexicraft seeking copper expansion compensators with female sweat ends for industrial applications. Please confirm if your products meet standard specifications for HVAC systems.  
Require clarification on minimum order quantity and compatible pipe dimensions.  
Need to understand your company's distribution capabilities and any geographical restrictions that might affect this procurement.

We are seeking GI pipe fittings in 1" to 4" sizes specifically for fire hydrant system installations. The products must meet standard specifications for water supply infrastructure. Looking to establish reliable supply channels with manufacturers capable of providing consistent quality. A face-to-face meeting with potential suppliers in Guangzhou is preferred to discuss technical requirements.

We require an automated solution for producing stainless steel coil assemblies with these specifications:  
- Processes 12m DN25 and 14m DN32 corrugated stainless steel tubes with welded stub pipes  
- Achieves 350mm coil diameter through controlled winding  
- Maintains precise pitch/tension to prevent tube damage  
- Integrates pre-welded wire cage application or cage-forming capability  
- Enables quick changeover between different tube lengths/coil specs  
- Complies with CE/UKCA safety standards  

Seeking either:  
1) Customized coil winding machine adaptation for stub ends and cage placement  
2) Complete turnkey system including winding, cage integration, and basic QC checks  

Vendors must confirm manufacturing capability, lead times, and budget requirements. Sample components available for testing if required.

We require 1 full set of phased array ultrasonic testing equipment for initial evaluation, including:
- PAUT Probe 7.5 MHz (16 elements with wedge/scanner compatibility
- Interchangeable wedge set covering pipe diameters from 1" to 3" (including dual height options for wall thickness variations
- Scanner system equivalent to R20-S with encoder and chain drive mechanism

Please provide:
1. Itemized pricing (FOB/CIF to Brazil)
2. Production lead time details
3. Potential volume discounts for future orders (3-5 sets anticipated based on project requirements)

This procurement is for industrial inspection applications. Equipment specifications must meet standard certification requirements.

We are seeking fiberglass scaffolding pipes and joints for construction projects in Saudi Arabia. Our primary requirement is for materials to assemble customized scaffolding structures. We may also consider purchasing complete ready-made fiberglass scaffolding systems if available.  
Please provide specifications and certifications for the components. Quantity requirements will be determined based on quality assessment and pricing terms.

We require 1 unit of HDPE Pipe Extrusion Line with PLC control system.  
Key specifications:  
- Pipe diameter range: 450mm to 800mm  
- Automatic PLC control  
- Complete production line configuration  

Please provide:  
1. Detailed technical parameters  
2. MOQ confirmation for single unit purchase  
3. FOB price and payment terms  
4. Estimated production lead time

We require pipe and drape systems for 430 exhibition booths with the following specifications:  
? Quantity: 430 units (1 unit per booth)  
? Dimensions: 2m (Width) × 2m (Height) per booth  
? Color: Black  
? Delivery: Required by early November  

Please provide:  
1. Technical specifications of the system  
2. MOQ requirements  
3. FOB price per unit  
4. Production lead time  
5. Installation guidance documentation  

Suitable suppliers with experience in large-scale event setups are preferred.

We are looking for  Fire Fighting Pipes - Fire Hose Cabinets - Fire Pumps . Please provide detailed specifications, MOQ, pricing, and lead time for your available items. Suppliers with international certifications are preferred.

Supply and delivery of ductile iron pipes with a diameter of 1200 mm (ISO) and a nominal pressure of PN16 bars, with a Polyethylene (PE) protection sleeve against SO? and salinity, in accordance with the approved drawings and Technical Specification Volume 1 and Volume 2, from the factory to the construction site. 

Have a project about firefighting piping system, plan to use black steel butt weld fittings. Ask for the catalog of black steel welded fittings. Size: DN65~250A

Ask about the price of a bulk of 60 upright adjustable poles 7 - 12ft with the crossbar and 60 bases

Interested in pipe laser cutting machine with semi automatic feeding system. One only, budget is $30k Australian ($20k USD), need in October