We require a rack-based electroplating system for surface coating of sintered NdFeB permanent magnets in automotive applications. The system must handle 100,000+ pieces daily with 11-stage process including acid cleaning, Wood's nickel strike, copper intermediate layer, and nickel top coat.

Key specifications:
- Coating thickness: Ni (5-7μm)/Cu (3-5μm)/Ni (10-15μm)
- Automated loading/unloading capabilities
- Minimum 50kg/hour throughput capacity
- Complete utility consumption data (electricity, chemicals, water)

Provide technical documentation including:
1. Process layout drawings
2. Chemical consumption rates
3. Waste treatment system details
4. Inline quality monitoring options

Include specifications for electrical load requirements and automation interface compatibility.

We require thermosetting SMC enclosures for low-voltage cable and metering connections with annual demand of 20,000-30,000 units.  

Technical specifications must include:  
- Depth options: 250mm or 320mm  
- Width/Height combinations: 260x400mm, 400x600mm, 660x800mm, etc.  
- Electrical parameters: AC 230/400V operational voltage, IP44 protection, IK10 impact rating  
- SMC material with 25-32.5% glass fiber content and 3.5mm minimum wall thickness  
- Modular construction with rigid structure and ribbed external surface  
- Natural ventilation system and water drainage features  
- Three-point locking system with corrosion-resistant metal rods  

Please provide unit pricing, commercial terms, delivery lead times, and warranty details. Offer must include validity period and MOQ information. Enclosures should comply with specified dimensions, material composition, and functional requirements for energy distribution applications.

We require design and supply of steam boiler systems for LPG processing with the following specifications:  
1. Storage Bullets: 50 m3 mounded design, ASME VIII Div.1 compliant, 17-20 barg pressure rating, dual PRVs with changeover system, complete with level monitoring and safety features.  
2. Vaporizers: Water-bath type with 400 kg/h capacity base configuration or 200 kg/h modular setup, including safety relief systems and temperature controls.  
3. Full compliance with ASME B31.3 piping standards and NFPA 58 safety requirements for entire system integration.  
All components must include proper pressure regulation stages from 6-8 barg down to 0.1-0.3 bar burner supply.

Looking to procure electric auxiliary boilers. Please provide product specifications and pricing details. Kindly avoid including any promotional content in your response.

We need portable conductivity meters and pH meters for boiler water quality monitoring. Required specifications:
- Conductivity measurement range up to 5000 ppm
- pH measurement range from 0 to 12
- No specific model requirements
Quantity required: 2 units for each type
Please provide standard portable models meeting these basic parameters.

I need to purchase 6 units of 4-inch water pumps. The pumps must be diesel-powered with electric start and semi-trash capability, suitable for salt water applications. The impeller should be made of aluminum, and the housing should preferably be aluminum or stainless steel. My budget is up to $450 per unit. Please provide your best offer.

We are seeking electric leisure boats for rental operations on lakes and calm waters. Key requirements include:
- Capacity for 4-5 passengers (optimal size) up to 8 passengers
- Models suitable for leisure and rental purposes (e.g. donut boats, compact designs)
- Technical specifications covering dimensions, weight, battery capacity and motor type
- Must provide FOB/EXW pricing, MOQ, production lead time and warranty terms
- Required certificates for European market (CE/ISO)
- Preference for 5-10 best-selling models with design photos and technical documentation
Looking for reliable manufacturers capable of long-term cooperation with efficient Europe shipping options.

We require 200 units of tricycle ambulances with enclosed panel van design for emergency medical transport. Key specifications include:
- Closed cabin with two seated passengers and lockable doors
- Water-cooled 175-225cc 4-stroke petrol engine (10-20L fuel capacity)
- 12V electrical system powering lights and siren
- 5.0-12 tyres with twin front shock absorbers
- Minimum 250mm ground clearance
- 2.2m(L) x 1.4m(W) x 1.6m(H) patient compartment
- 1,000-2,000kg loading capacity
All proposals must include technical brochures demonstrating compliance with specified suspension, braking, and load-bearing requirements.}

Seeking an ultrasonic cleaning device specifically designed for deep water well maintenance. The device must:
1. Operate at 20-40 kHz frequency range
2. Withstand depths up to 200 meters (20 bar pressure)
3. Feature a compact design with maximum 160mm diameter head
4. Utilize ultrasound technology to remove suspended solids in water filtration zones
5. Be compatible with electric cable deployment

Require shipment to Poland for operational testing. Please confirm technical specifications and compliance with EU standards.

We are seeking small electric leisure boats suitable for rental operations on lakes and calm waters. Required models must accommodate 4-5 passengers optimally with maximum capacity up to 8 passengers.  

Please provide:  
1. Technical specifications including dimensions, weight, materials, motor type, battery capacity, operating time, and charging options  
2. FOB/EXW pricing with MOQ and production lead time  
3. Available Incoterms (FOB/CIF/DDP) with estimated shipping costs to Austria/Europe  
4. CE/ISO certifications documentation  
5. Warranty terms and after-sales service details  

Share recommendations on your best-selling models for rental businesses. Include product photos/catalogs highlighting design and technical features. Priority given to suppliers capable of long-term partnership.

Product: Air filter oil water separator for Burner for Auxiliary Boiler  
Model/Type: QSL-50  
Brand Requirement: HENG LING PNEUMATIC  
Quantity Required: 3 units  
Pressure Range: 0.15-0.8 Mpa  

Please provide product specifications and availability confirmation.

Require gold centrifugal concentrator with below specifications:  
1. Processing capacity: 0.5-0.6 t/h for feed ≤3mm (optimal 0.074-2mm)  
2. Electrical versions: 220V single-phase and/or 380V three-phase  
3. Customized diesel engine version with cost difference  
4. Minimum 95% fine gold recovery rate  
5. Water consumption: 2-3 m3/h  
6. Manual operation with 1-4 hour cleaning cycle  
7. Must include: Bowl with replaceable rubber liners, carbon steel casing, basic spare parts kit, operation manual  
8. FOB China port delivery  
9. Initial order quantity: 1 unit (potential repeat orders)  
10. Final destination: Callao Port, Peru

? Quantity required: 50 pieces  
? Product specification: Water level tube compatible with electric food steamers  
? Delivery requirement: Needed within 1 month  
? Seeking reliable supplier capable of providing:  
 - Detailed product specifications  
 - MOQ confirmation  
 - Competitive pricing  
 - Lead time confirmation  
? Prefer manufacturers/suppliers with experience in commercial kitchen equipment parts

We are seeking reliable suppliers of electrical floats for water tank applications. Please provide your product catalog with detailed specifications, MOQ, pricing, and delivery timelines. Our priority is to establish long-term partnership with manufacturers capable of offering quality components suitable for water level monitoring systems.

We are seeking industrial atmospheric water generators for water bottling plant operations. Requirements include:  
1. Minimum capacity: 20,000 liters per day  
2. Solar-powered operation capability  
3. Technical specifications for largest available unit  
4. Electrical power requirements documentation  
5. Pricing details and minimum order quantity  
6. Production lead time  
Suppliers please provide:  
- Product certifications  
- Installation requirements  
- After-sales service terms  
- Case studies of similar large-scale projects

1HP water pump with 1'' outlet and 2–4 bar pressure.

I would like to purchase some hot electric bags.

I need a water turbine for our small hydro electricity production. We have a 700kw generator and gearbox. Want to know if you can supply that. Pelton turbine. Vertical. Can hear your offers

ss304 brass CR04 2 wire 5v 12v 24v CWX - 25S electric self closing water valve

We are trying to find a mixing pump to dissolve the thickener "Xanthan Gum" in warm water. Now we are doing it manually with an electric mixer, but we have to improve this process using an electric pump. The quantities are small as we use Xanthan Gum as an additive to a beverage, so we need a small and efficient pump. Flow rate could be less than 1000 liters per hour. We have no preferences, only a good pump with cheap cost.

Seek to develop premium air-cooled jackets combining Japanese BURTLE - level technology with European fashion aesthetics in lightweight materials. Technical specifications: 1. Cooling Technology Integration: Built - in rechargeable fan system (min 2 fans), 4 - speed adjustable wind levels, lithium - ion battery pack (min 6 - 12 hour operation), optional neck cooling system integration, 5 - 15°C temperature reduction. 2. European Compliance Standards: CE marking, EN ISO 13688:2013, LVD 2014/35/EU for electrical components, EN 60335 series for battery - powered devices, anti - static per EN 1149, electrical safety for battery systems. 3. Material Specifications: Outer shell of high - performance polyester/nylon blend, UPF 40 UV protection, water - resistant (min 5,000mm), breathable and durable, aluminum coating for heat insulation, anti - microbial treatment. 4. Design Standards: Modern European cut, premium YKK zippers, multiple pockets, adjustable hood, ergonomic fit, professional logo embroidery, reinforced seams. Business requirements: Initial production: 5 - 10 samples, 100 - 500 pilot pieces, scalable to 10,000 annually. Low MOQ: 5 - 10 samples, 50 - 100 initial pieces. Dropshipping needed. Need detailed pricing for sample development, small, medium and large volumes, technology components, and European compliance testing and certification. Respond within 7 days with capabilities and quotation.

I’m working on a new summer product: a portable evaporative cooling tile — a small, reusable product made from PVA sponge, designed to be soaked in water and provide non - electric cooling. I’m thinking of a tile about 6 × 6 cm and 1 cm thick.1. Can you produce PVA sponge blocks or pads in small custom shapes like a tile?2. Do you offer OEM/private - label (logo and custom packaging)?3. What is your MOQ and price range for 100–500 units?4. Can I receive a sample for testing?5. What customization options are available for shape, color, thickness, or accessories?

I am looking for gas instant water heater and also electric, i have huge quantity to buy

Looking for a factory that can produce electric circular water heaters, similar to Ariston models. Please send product catalog or similar models, MOQ and price, production time, OEM/branding options. Ready to place trial orders and discuss long - term cooperation.