Allen-Bradley 1336-SN-SP10A Adjustable Frequency AC Drive

Analog input: Supports multiple analog signal inputs, commonly including 4mA-20mA DC current signals and 0V-10V DC voltage signals. It is used to receive process control signals from sensors, controllers, and other devices. The input impedance meets industrial standards (specific values are subject to the product manual) to ensure the accuracy of signal transmission.

Digital input: Equipped with multiple digital input ports, which can receive switching signals (such as start-stop signals, forward-reverse signals, fault reset signals, etc.). The input voltage is usually 24V DC, with a short response time (generally at the millisecond level), enabling quick capture of external control instructions.

Analog output: Can provide 4mA-20mA DC current signals or 0V-10V DC voltage signals as analog outputs, which are used to transmit the processed signals of the module to other devices (such as recorders, displays, superior control systems, etc.). It has high output accuracy and good linearity (specific accuracy parameters are subject to the product manual).

Digital output: Has multiple digital output ports, which can output switching signals for controlling external equipment (such as relays, indicator lights, alarm devices, etc.). The output capacity is usually 24V DC/1A (specific parameters are subject to the product manual), which can meet the driving needs of most industrial control occasions.

Control mode: Supports multiple control modes, such as voltage control, current control, speed control, etc. It can be selected through parameter settings according to actual application scenarios to meet different control needs.

Response time: The response time of control instructions is short, ensuring rapid adjustment of the motor's operating status and improving the dynamic performance of the system (specific response time is subject to the product manual).

Overcurrent protection: When the current in the module or related circuits exceeds the rated value, overcurrent protection will be triggered to cut off the relevant circuits or limit the current output, preventing damage to the module and connected equipment.

Short-circuit protection: If a short-circuit fault occurs at the output end of the module, the short-circuit protection function will act quickly to avoid serious damage caused by excessive short-circuit current.

Overvoltage protection: When the input voltage or internal circuit voltage rises abnormally beyond the set threshold, overvoltage protection is activated to protect the internal components of the module.

Undervoltage protection: When the input voltage is too low, the undervoltage protection function takes effect to prevent the module from working in a low-voltage state, which may affect control accuracy or damage equipment.

Operating temperature: Can work stably in an ambient temperature of 0°C-50°C (specific parameters are subject to the product manual) and can adapt to common temperature changes in industrial sites.

Relative humidity: Can operate normally in an environment with a relative humidity of 5%-95% (non-condensing), suitable for humid industrial workshops and other occasions.

Protection level: Generally IP20 (installed indoors, need to avoid direct intrusion of dust and liquid). It usually needs to be used with a control cabinet during installation to improve the overall protection effect.