Allen-Bradley 1783-MX08T Ethernet Managed Switches

It has 8 10/100/1000BASE-T Gigabit Ethernet electrical ports (the specific number is subject to the product manual), supports auto-negotiation (speed and duplex mode), can automatically adjust the transmission rate according to the capability of connected devices, and is compatible with network devices of different rates.

The electrical ports support the IEEE 802.3 standard and have MDI/MDIX auto-crossover function, eliminating the need to distinguish between straight-through cables and crossover cables, which simplifies network cabling and device connection.

The backplane bandwidth is relatively high (specific value refers to the product manual), which can meet the needs of multiple ports for high-speed data transmission at the same time, ensuring non-blocking data forwarding.

The forwarding rate is fast (specific value refers to the product manual), which can efficiently process a large amount of real-time data in industrial sites and ensure the timely transmission of control commands and status information.

Supports IEEE 802.1Q VLAN (Virtual Local Area Network) function, which can divide the network into multiple logical subnets, isolate different types of data flows, and improve network security and bandwidth utilization.

Supports STP (Spanning Tree Protocol), RSTP (Rapid Spanning Tree Protocol) and MSTP (Multiple Spanning Tree Protocol) to prevent loops in the network, ensure stable operation of the network, and quickly restore network connections.

Supports QoS (Quality of Service) function, which can classify and schedule data flows of different priorities to ensure the priority transmission of key control data and reduce delay and jitter.

Supports IGMP Snooping (Internet Group Management Protocol Snooping) to optimize multicast data transmission, avoid multicast traffic flooding, and improve network efficiency.

Supports Web browser management. Users can configure, monitor and diagnose faults of the switch through an intuitive web interface, with simple operation.

Supports SNMP (Simple Network Management Protocol) v1/v2c/v3, which can be integrated into the network management system to realize centralized management and remote monitoring of the switch.

Supports port mirroring function, which can copy the data flow of the specified port to the monitoring port, facilitating network fault troubleshooting and data flow analysis.

Supports firmware upgrade function, which can remotely update the switch firmware through the network, facilitating device function upgrade and vulnerability repair.

Input voltage: Usually supports 24V DC power supply (specific voltage range is subject to the product manual), compatible with common DC power supply systems in industrial sites.

Power consumption: The power consumption is low during normal operation (specific value refers to the product manual), which has little load on the power supply system.

Operating temperature: Can operate stably in a wide temperature range of -40°C to 75°C (specific range is subject to the product manual), and can adapt to extreme temperature environments such as outdoor equipment rooms and high-temperature workshops.

Relative humidity: Can work normally in an environment with a relative humidity of 5% to 95% (non-condensing) (specific parameters are subject to the product manual), suitable for humid or dry industrial environments.

Protection level: Has a high protection level, such as IP30 (specific level is subject to the product manual), which can effectively prevent dust and foreign objects from entering and protect internal components.

Anti-vibration and impact: Complies with relevant industrial standards (specific standards are subject to the product manual), can withstand vibration and impact in industrial sites, and ensure stable operation of the equipment.