ASTM D613 Automatic Octane Number and Cetane Number Tester ASTM D2700

Automatic Octane Number and Cetane Number Tester 　    

Product model: JF386Z

Product Introduction

The principle of the instrument is to measure the insulation permeability of gasoline octane number and cetane number of diesel oil and the electric charge characteristics of electromagnetic induction. The result is determined by measuring the dielectric properties of the oil and comparing it with a known data model stored in memory. The sensing device is very accurate, and can measure small changes in dielectric parameters. Thus, petroleum product parameters such as octane number and cetane number can be detected.

Technical Parameter

1. Applicable standards: ASTM D613,ASTM D2699,

ASTM D2700,ASTM D4737,ISO 5165

2. Measurement Items: Vehicle Gasoline and Diesel

3. Operating range: Temperature: -10℃~+40℃,

Relative humidity: 30%~81%R.H.,

Atmospheric pressure: 64~106kPa

4. Measuring range of octane number: 40-120 (ON)

5. Allowable measurement error of octane number: ±0.5

6. The floating range of the octane number measurement result: ±0.2

7. Measuring range of cetane number: 20-100 (CN)

8. Allowable measurement error of cetane number: ±1

9. The floating range of the cetane number measurement result: ±0.5CN

10. Measurement time: <20S

11. The lowest battery voltage: V2.5

12. Output mode: LCD display, print output

13. Dimensions: 56(H) x 74(W) x 36(D)cm

14. Weight: about 20kg

15. Power supply:  220V, 50Hz

16. HS Code: 9027899090

Features

1. High precision.

2. Automatic measurement, automatic printing.

3. The instrument can detect octane number of gasoline and cetane number of petrochemical diesel oil.

4. The sensor is very accurate and can measure tiny changes in dielectric parameters.

5. The results are measured by measuring the dielectric properties of the oil and comparing it with a known data model in memory.

1. Q: What services are supported? 

A: Free lifetime online technical services are supported.   

2.Q: How long is the warranty period of the equipment sold? 

A: The warranty is for twelve months 

3.Q: How long is the delivery time? 

A: Within 3 working days after receiving the down payment for the products in stock, and the specific delivery time depends on the order quantity and products.   

4.Q: What is the minimum order quantity? 

A: For the equipment, the minimum order quantity will be 1 set. For the lab parts, please contact us for final confirmation. 

5.Q: What’s your transportation? 

A: Express, air, sea transportation are supported, and appointed forwarders are also supported. 

6.Q: Do you accept customization service? Can I have my logo on the machine? 

A:Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.   

7.Q: How to install and use the product? 

A: Operating instructions or video will be sent to you online or by email. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use.  

8.Q: What’s the trade term and delivery term? 

A: Most of the common trade terms are supported, like CIF, FOB, CFR and so on . We have ordinary instruments in stock, the delivery time is 1-7 working days. If there are not in stock, the delivery time is 15-30 working days after the down payment.  If you are in urgent, we can consider making a special arrangement for you.