Homogenous transparent PVC roll flooring production line equipment

FOB Price

US$ 1155000 - 1155882 / Set

1 Set(Min. Order)

Port Shanghai
Payment TermsT/T L/C PayPal D/P Western Union
Delivery Detail26 days

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Description

Construction plan for homogeneous transparent flooring

The preparation and treatment of flooring are important before laying elastic flooring. As the thickness of commonly used PVC flooring indoors generally does not exceed 4mm and lacks self-supporting capacity

The requirements for the foundation of the floor are very high. The quality of the ground affects and determines the effectiveness and appearance of elastic flooring materials. Floor requirements: Humidity: According to the opinion of the glue manufacturer, the foundation should include

The water content (weight percentage) should be less than 6%. In case of weather conditions or external moisture, the air should be circulated and surface moisture should be promptly wiped off. The air humidity in the construction site should be maintained at

20% -75%. Surface hardness: Use a sharp chisel to quickly cross cut the surface, and there should be no cracking at the intersection. Surface flatness: Check with a 2-meter ruler, and the gap should not exceed 2mm.

Surface compactness: The surface should not be too rough or have too many pores, and surface hardening treatment should be applied to lightly sanded surfaces. Cracks: There shall be no cracks wider than 1.5mm. outside

There should be no hollowing in the layers. Surface cleanliness: Residual substances such as oil stains, wax, paint, pigments, etc. must be removed. Temperature: The temperature of the laying site should be 15 degrees Celsius and should not be lower than 10 degrees Celsius. another

Externally: The horizontal benchmark should be maintained, and suitable sealing should be provided at the settlement joints of the building. To ensure the effectiveness of large-scale laying (flatness, strength), it is recommended to level the layer before laying

Use bottom oil and self leveling, especially in the renovation of old buildings. To ensure that the site after laying has sufficient strength to support the various layers of structures on it and withstand high loads during future use

Load, it is recommended to choose a high-grade leveling layer. If it is made of fine aggregate concrete, the recommended grade is C30. The cement mortar surface layer should strictly follow the domestic standard of ≥ M15

Strength standards, taking cement flooring as an example, other flooring will be discussed separately. PVC flooring and auxiliary materials should be vertically erected and placed in a reliable indoor environment, while maintaining ventilation

Dry and avoid light, do not stack. The roll material should be placed upright, and the accessories should be unfolded and placed without pressure. The indoor temperature should be 15 degrees Celsius. Apply primer and ground treatment to meet construction requirements

Afterwards, mix the base oil with water according to the standard ratio, wet the base oil with a sponge roller, and cross it horizontally and vertically on the floor surface in order without omission, evenly apply it, and ensure that there is no accumulation on the floor surface

Water phenomenon, then close the site, and self leveling construction can be carried out after 1-2 hours. If the floor has strong water absorption, it can be added once to ensure the sealing effect. Self leveling construction, self leveling

Mix the leveling material and water material according to the standard ratio and stir evenly. Pour the mixture onto the construction floor at a faster speed. Use specialized tools to evenly spread the mixture and allow it to flow naturally

The average thickness is around 2 millimeters, with thicker areas generally not exceeding 4 millimeters.

A. Construction steps: (1) Use 3.5 kilograms of self leveling material per square meter, with a water to material ratio of approximately 1:4, and mix evenly according to this ratio; (2) Pour the mixture at a faster speed to

Construction ground; (3) Apply specialized tools to evenly spread the mixture, with an average self leveling thickness of about 2mm, generally not exceeding 4mm in thicker areas; (4) At an ambient temperature of around 10 ℃

In this case, the self leveling curing time is 12 hours, and after the self leveling is completed, it should be cured for 2-3 days until the strength and dryness meet the requirements for laying the floor

The floor.

Our company adopts a precedent PVC homogeneous transparent floor production line, with a strong technical research and development team, excellent processing equipment, and rich experience in designing and processing extrusion equipment,

Ensure to provide customers with a complete set of equipment turnkey projects and 24-hour after-sales service. The PVC homogeneous transparent floor production line developed by our company adopts a precedent and practical process,

Reasonable and convenient operation, capable of producing thicknesses of 2-3 millimeters and widths of 2000mm, with a daily output of up to 3000m2. It can process various colors of homogeneous and transparent floral flooring, providing

Customers provide more choices. At present, it has provided equipment to several major floor manufacturers in China, and exported to Poland, Ukraine, Türkiye, Russia, etc., obtaining one of the largest domestic and foreign customers

To acknowledge.

PVC homogeneous transparent floor leather is made by mixing various colors of PVC crushed particles with reasonable proportions, heating and pressing them together. Due to its environmental friendliness, ornamental value, and ease of maintenance, it should mainly be Ground laying materials used in residential, hospital, school, factory, hotel, catering and other places.

Contact Us

Wuxi Boyu plastic machine Co., Ltd.: Contact nameChenPing
Chat Now; Phone86-0510-88273396; AddressXiqun Road, Meicun Street, Xinwu District, Wuxi, Jiangsu