Perfect Laser Mixed Laser Cutting Machine For Metal, SS, Acrylic, Wood, Plastic

Product Introduction

Mix Cutting Co2 Laser Cutting Machine can be used to cut both metal and non-metal material, so we call it mix laser cutting. It is a special laser cutting machine for metal and non-metal.
The laser cutting machine for metal's cutting thickness can reach 1-2mm stainless steel, 1-3mm carbon steel and mild steel, 20-30mm acrylic and plastic, 10-20mm wood, 1-10mm MDF.
The laser cutting machine for metal is really a good choice for user have demand to cut metal and non-metal material together. One machine can fulfill all your demand. No need to buy one Co2 laser engraving machine plus one fiber laser cutting machine. The laser cutting machine for metal really is a high efficiency machine. It also called mix laser cutting,laser cutting machine for metal,arcylic cutting,stainless steel cutting,cutting acrylic sheets,mixed laser cutting.

Product Features

1. The high photo-electric conversion efficiency can be up to about 30%. So the laser cutting machine for metal runs with the lowest power consumption compared to other laser cutting machines under output power. The cutting lost is the lowest.
2. With laser beam of good quality from high power laser tube, the focus spot is very fine, and the cutting seam is very smooth. Then the efficiency can be higher, and the quality is better.
3. The light path is totally composed of fiber laser and fiber laser units, which are combined together based on cable splicing technology. And the whole light path is enclosed in fiber laser wave guide.
4. No laser working gas and can start cutting just by blowing air.
5. The efficiency is very stable and reliable, and you have no need to adjust the light path. So it is easy to operate and maintain the machine.
6. The laser cutting machine for metal costs little water and energy. And the machine requires no gas. So the running cost is lower.

Application

Materials can be engraved

Acrylic, wood, MDF, plastic, bamboo, rubber, PVC board, etc.

Materials can be cut

1-2mm stainless steel, 1-3mm carbon steel, 1-30mm acrylic, plastic, rubber, PVC,1-15mm wood, MDF, plywood, bamboo, foam, EVA, etc.

Technical Data