Thickener 909 for Coating

HY CHEMICALS (KUNSAN) Co., LTD
THICKENER 909 FOR COATING
Thickener 909 is a polymer of acrylic monomers. It is an anionic synthetic thickener. It is suitable for waterproof coatings, fireproof coatings, real stone paints, latex paints, and is used with cellulose. This product does not need to adjust the PH value, directly thickens, and the process is simple. The thickening effect is good and the cost can be reduced. Good thickening stability.
Characteristic
1. Fast thickening speed and high thickening ratio.
2. Excellent water resistance, alkali resistance and stain resistance.
3. Environmental protection, formaldehyde and APEO meet OEKO standards
4. The addition ratio is small, and the recommended addition ratio is 0.3%
Technical index
Appearance: Milky white liquid
Solid content: 38±2%;
Viscosity: 32000Mpa.s (addition amount 2.8%)
PH: 6-7
Precautions
     1. The thickening ability of soft water is greater than that of hard water.
     2. Cannot be used with cationic additives.
     3. Store in an environment of 0-40oC for one year.
     4. When hands, clothes or utensils are stained with thickeners, wipe them with cloth or paper first, and then wash them with a small amount of salt electrolyte and water.
Note: The above content is the data confirmed by practice. Because the process of each factory is different, please confirm the process after experiment.
Transportation and Storage:
Storage or transportation below 0°C may cause layering or turbidity. Heat and stir before use."