- Shanghai Genyond Technology Co., Ltd.
-
2YrsShanghai, China - Main products: food machine, vegetable fruit machine, dairy processing machine, fruit juice machine, fruit chips machine, pizza vending machine
Home > Products > dairy/milk/ice cream processing line > New Arrival fresh milk machine yogurt produce line
New Arrival fresh milk machine yogurt produce line
Negotiable
1 (Min.Order)
- T/T Credit Card
You May Like
-
Factory Price milk processing machine dairy processing machines
-
Genyond milk process machine dairy produce line
-
Factory Genyond Small Capacity Pasteurized Milk Making Machine Yogurt Processing Plant
-
Stainless steel sanitary pump Food grade beverage pump High Yang Cheng milk pump
-
Stainless steel high viscosity rotor pump food grade transfer pump Sanitary colloid pump
-
Stainless steel plate heat exchanger Food heating heat exchanger Plate hot water circulation cooler
Product Description
Products Description
Production line introduction:
After centrifugation, standardization, homogenization, sterilization and cooling, the whole process is seamless. This production line project,
customers can choose to do UHT high temperature milk, pasteurized milk, lactic acid bacteria drinks, yogurt drinks, etc.
The packaging is diversified and can be customized according to the demand.
This milk production line produces several types of pasteurized milk products, i.e. whole milk, skimmed milk and standardized milk of various fat contents.
First the milk is preheated and standardized by in line milk fat standardization system. The purpose of standardization is to give the milk a defined, guaranteed fat content.
Common values are 1.5% for low fat milk and 3% for regular grade milk, fat contents as low as 0.1 and 0.5 % is skimmed milk.
Then the standardized milk is homogenized. The purpose of homogenization is to disintegrate or finely distribute the fat globules in the milk in order to reduce creaming.
Homogenization may be total or partial. Partial homogenization is a more economical solution, because a smaller homogenizer can be used.
The milk now is pumped to the heating section of the milk heat exchanger where it is pasteurized. The necessary holding time is provided by a separate holding tube.
The pasteurization temperature is recorded continuously. Pump is a booster pump which increases the pressure of the product to a level at which the pasteurized product
cannot be contaminated by untreated milk or by the cooling medium if a leak occur in the plate heat exchanger. If the
pasteurization temperature should drop,
this is sensed by a temperature transmitter. A signal activates flow diversion valve and the milk flows back to the balance tank.
After pasteurization the milk continues to a cooling section in the heat exchanger, where it is regeneratively cooled by the
incoming untreated cold milk, and then to the cooling section
where it is cooled with ice water. The cold milk is then pumped to the filling machines.
Temperature and pasteurization holding time are very important factors which must be specified precisely in relation to the quality of the milk and its shelf life requirements.
The pasteurization temperature is usually 72 – 75C for 15 – 20 sec. A common requirement is that the heat treatment must guarantee
the destruction of unwanted microorganisms and of all pathogenic bacteria without the product being damaged.
After centrifugation, standardization, homogenization, sterilization and cooling, the whole process is seamless. This production line project,
customers can choose to do UHT high temperature milk, pasteurized milk, lactic acid bacteria drinks, yogurt drinks, etc.
The packaging is diversified and can be customized according to the demand.
This milk production line produces several types of pasteurized milk products, i.e. whole milk, skimmed milk and standardized milk of various fat contents.
First the milk is preheated and standardized by in line milk fat standardization system. The purpose of standardization is to give the milk a defined, guaranteed fat content.
Common values are 1.5% for low fat milk and 3% for regular grade milk, fat contents as low as 0.1 and 0.5 % is skimmed milk.
Then the standardized milk is homogenized. The purpose of homogenization is to disintegrate or finely distribute the fat globules in the milk in order to reduce creaming.
Homogenization may be total or partial. Partial homogenization is a more economical solution, because a smaller homogenizer can be used.
The milk now is pumped to the heating section of the milk heat exchanger where it is pasteurized. The necessary holding time is provided by a separate holding tube.
The pasteurization temperature is recorded continuously. Pump is a booster pump which increases the pressure of the product to a level at which the pasteurized product
cannot be contaminated by untreated milk or by the cooling medium if a leak occur in the plate heat exchanger. If the
pasteurization temperature should drop,
this is sensed by a temperature transmitter. A signal activates flow diversion valve and the milk flows back to the balance tank.
After pasteurization the milk continues to a cooling section in the heat exchanger, where it is regeneratively cooled by the
incoming untreated cold milk, and then to the cooling section
where it is cooled with ice water. The cold milk is then pumped to the filling machines.
Temperature and pasteurization holding time are very important factors which must be specified precisely in relation to the quality of the milk and its shelf life requirements.
The pasteurization temperature is usually 72 – 75C for 15 – 20 sec. A common requirement is that the heat treatment must guarantee
the destruction of unwanted microorganisms and of all pathogenic bacteria without the product being damaged.
Processing flow
Product Paramenters
Model | Voltage | Power | Material | Weight |
GY-MM-10 | 220V/380V | 30KW | Stainless Steel 304/316L | 3000KG |
GY-MM-50 | 220V/380V | 50KW | Stainless Steel 304/316L | 6000KG |
GY-MM-100 | 220V/380V | 80KW | Stainless Steel 304/316L | 9000KG |
Detail Pictures
Our Advantages
FAQ
Contact Us
Attn:Lebron Ma
GENYOND MACHINERY INDUSTRIAL GROUP LIMITED SHANGHAI GENYOND TECHNOLOGY CO., LTD
ZHANGJIAGANG GENYOND MACHINERY CO., LTD
Address:Room 1416-1418 Shatian Building NO.587 changshou road Putuo District 200000 Shanghai
TEl: +86 2134796156
Office Mob/WeChat/WhatsApp: +86 18916252295
Official website:
Recommend Products
Company Profile
Shanghai Genyond Technology Co., Ltd.
Shanghai Genyond Technology Co., Ltd. is a manufacturer of extracting unit and fruit & vegetable processing line with well-equipped testing facilities and strong technical force.With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in food and beverage and other industries.Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Contact Us
- Shanghai Genyond Technology Co., Ltd.
- Contact nameWakin Yong Chat Now
- Phone86-021-34796156
- Address1416-1418 Shatian Building, No 587 Changshou Road, Shanghai, China.
Product Categories
New Products
-
Final Manufacturer factory complete mango bar fruit leather forming making machine fruit roll up process plant production line
-
Factory Automatic fruit roll up scraping forming drying cutting making processing machine fruit leather production plant line
-
Automatic Fruit Leather fruit roll up scraping sheeting drying Cutting and Making Machine/production line
-
Dehydrated Hawthorn fruit leather production line
-
Hawthorn fruit leather hawthorn sweetend roll processing line fruit bar packing machine
-
Automatic Fruit Leather Cutting machine production line
-
Fruit leather bar roll up pulping Scraping forming cutting making machine production line
-
Hawthorn fruit leather hawthorn sweetend roll processing line
-
Hot sale Fruit leather production line from manufacturer
-
fruit leather making machine/production line
-
Fruit leather making machine/production line
-
fruit leather cutting and packing machine
-
Shanghai Complete Fruit Leather Processing Machines
-
automatic fruit leather cutting machine with factory price
-
high efficiency fruit leather making machine
-
Automatic Fruit leather roller mango candy production line
-
commercial fruit leather snack production line
-
small capacity mango bar making machines full automatic fruit leather processing plant
Popular Searches
- milk
- pasteurizer
- high pressure homogenizer
- Cheese
- Condensed Milk
- full cream milk
- Milk Production Line
- Milk Processing Line
- Milk Processing Plant
- Dairy Homogenizer
- Milk Cooling Tank
- processing tank
- food processing tank
- glass supporter
- milk making
- Milking Machines
- milking equipment
- milk tank
- Cow Milking Machine
- Goat Milking Machine
- Machine Milk
- Processing Line Project
- Milk Silo
- Soy Milk
- soya milk
- Yogurt Production Line
- Milk Processing Machine
- tomato paste processing line
- tomato paste plant
- tomato paste processing plant
Find Similar Products By Category
- Manufacturing & Processing Machinery > Machinery for Food, Beverage & Cereal > Dairy Processing Machinery
Shanghai Genyond Technology Co., Ltd.
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Shanghai Genyond Technology Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Wakin Yong
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile