- Shenzhen Kexinxin Technology Co., Ltd.
-
Shenzhen, Guangdong, China
- Main products: Integrated Circuits, Tantalum Capacitor, Mosfet, Crystal, Diodes
6VDC； 250VAC 3A Electronic Components HK4101F-DC12V-SHG
- Shenzhen
- T/T L/C D/P D/A Credit Card PayPal Cash
You May Like
-
Electronic Components Supplier HLSR 50-P LEM USA Inc. SENSOR CURRENT HALL 50A AC/DC
-
High ruggedness, temperature stable Integrateds Circuit HMG75N65T
-
Original Electronic component HO 25-P Current Sensors
-
Single Port RJ45 Conncteor for 10/100Base-T NIC Applications HR911105A with Integrated Magnetics and LED
-
Original integrated circuit INN9259 Unique Lower EMI 5.0V to 20V Input, 1.0-A Synchronous Step-down Converter
-
IP4220CZ6,125 ESD Nexperia Suppressors / TVS Diodes IP4220CZ6/SOT457/SC-74
Product Details
| Brand Name | HONGFA | Place of Origin | China | |
| Model Number | HK4101F-DC12V-SHG | Size | Miniature | |
| Usage | General Purpose | Contact Load | Low Power | |
| Protect Feature | Epoxy | Theory | Electromagnetic Relay |
Product Description
Factory
Mfr. #: HK4101F-DC12V-SHG
Safety Standard: C-UL CQC TUV
Contact Specification:
Contaact Gap: 0.3mm Minimum
Contact Resistance:
Maximum 100m? at initial value. Test Current: 1A, Open Circuit Test Voltage: 6VDC. By using Voltage Drop Metho
Contact Capacity:
3 Amps at 250VAC Cosφ=1. 3 Amps at 30V
Coil Specification at
20 °C:
Rated Voltage: 12VDC.
Nominal Current: 12.5/16.7/30
Rated Power
Consumption: 0.15W/0.2W0.36W
Coil Resistance: 960/720/400
Pull In Voltage:
≦ (Contact operating voltage when voltage is gradually applied. It is 80%
of the Rated Voltage) V DC
Drop Out Voltage: ≧ (Contact breaking voltage when rated voltage is gradually reduced. It is
10% of the Rated Voltage) VDC
Max. Allowable
Voltage:
(130% of the Rated Voltage) V DC
Operate Time: 6 milliseconds Maximum when rated Voltage is applied.
Release Time: 4 milliseconds Maximum when rated Voltage is suddenly cut off.
Coil Temperature
Rise: 40℃ Maximum. Maximum Allowable Voltage is applied to Coil while no load should be applied
to Contacts, then the temperature should be measured when the value is
stabilized. Environment temperature should not be included in.
Electrical
Characteristics:
Life Expectancy:
Electrical Life: 100,000 operations Minimum at 3A/250VAC Cosφ=1. 100,000 operations Minimum at3A/30VDC
Rated Voltage is applied.
Mechanical life: 10,000,000 operations Minimum at No Load condition.
Maximum
Operating
Frequency: Electrical: 30 operations/minute. Mechanical: 300 operations/minute.
Dielectric Strength:
Between
Contacts: 500VAC at Test Frequency 50/60 Hz, Leakage Current: 1mA for 1 minute.
Between Coil &
Contact: 1,000VAC at Test Frequency 50/60 Hz, Leakage Current: 1mA for 1 minute.
Insulation
Resistance: ≧100 MΩ Minimum. A Voltage of 500VDC should be applied after which measurement shall be
made.
Vibration:
Endurance I: The Coil shall be maintained under not energized condition, double amplitude
1.5 mm, the entire frequency range changes from 10 to 55 Hz then returns to
10 Hz shall be made in 1 minute. This motion shall be applied for a period of
2 hours in each of 3 mutually perpendicular axis (a total of 6 hours) There
should not be any deformations in construction and in appearance, while the
Electrical Specifications should be fulfilled after the test.
Endurance II
(Error
Operation): The Coil shall be maintained under energized condition, double amplitude 1.5
mm, the entire frequency range changes from 10 to 55 Hz then returns to 10
Hz shall be made in 1 minute. This motion shall be applied for a period of 5
minutes in 3 mutually perpendicular axis. Malfunction is not allowed during
the test (contact breaking time should be less than 1 millisecond) In addition,
there should not be any deformations in construction and in appearance while
the Electrical Specifications should be fulfilled after the test.
Shock:
Endurance I:
Peak Acceleration: 1000m
The Coil shall be maintained under not energized condition, 5 successive
shocks shall be applied in 3 mutually perpendicular axis. There should not
be any deformations in construction and in appearance while the Electrical
Specifications should be fulfilled after the test.
Endurance II
(Error
Operation): Peak Acceleration: 100m/s2
The Coil should be maintained under energized condition, 2 successive
shocks shall be applied in 3 mutually perpendicular axis. Malfunction is not
allowed during the test (contact breaking time should be less than 1
millisecond) In addition, there should not be any deformations in construction
and in appearance while the Electrical Specifications should be fulfilled after
the test.
Environmental
Characteristics:
Temperature Range:
Operating
Temperature
Range:
Operating temperature range is the range of ambient temperature of which the
Relay can be operated continuously within operative voltage range of coil (no
condensation of water drops under low temperature condition)
Storage
Temperature
Range: Storage temperature range is the range of ambient temperature of which the
Relay can be stored without damages (no condensation of water drops under
low temperature condition). Conditions are as specified elsewhere in these
specifications
Humidity Range: 35~85% RH.
Cold Resistance:
Cold
Resistance in
Use: Relay should be kept in temperature chamber at -30 ± 2°C for two hours that
no current or voltage shall be supplied to Relay. Such condition shall be
maintained while the rated voltage is supplied to Relay, then the Relay shall
operate normally. (No condensation of water drops under low temperature
condition)
Storage Cold
Resistance: Relay should be kept in temperature chamber at -40 ± 2°C for 72 hours. Then the Relays shall be maintained at standard atmospheric condition for 1
to 2 hours after which measurement shall be made. Construction, Relay
operation, Insulation Resistance and Dielectric Strength shall satisfy the
specification requirements. (No condensation of water drops under low
temperature condition)
Heat Resistance:
Heat
Resistance in
Use: Relay should be kept in temperature chamber at 70 ± 2°C for two hours that
rated Voltage should be supplied to Coil while rated Current should be
supplied to Contacts. Such condition shall be maintained while the rated
voltage is supplied to Relay, then Relay shall operate normally.
Storage Heat
Resistance: Relay should be kept in temperature chamber at 70 ± 2°C for 16 hours. Then
the Relays shall be maintained at standard atmospheric condition for 1 to 2
hours after which measurement shall be made. Construction, Relay
operation, Insulation Resistance and Dielectric Strength shall satisfy the
specification requirements.
Moisture
Resistance: Relay should be kept in temperature chamber at 40 ± 2°C (90~95% RH) for 48
hours. Then the Relays shall be maintained at standard atmospheric
condition for 1 to 2 hours after which measurement shall be made. Construction, Relay operation, Insulation Resistance, Dielectric Strength shall
satisfy the specification requirements.
Terminal Strength: A load of 300g should be applied to the Terminal for one minute in horizontal
direction. There should not be any looseness or bending of Terminals.
Soldering Dip Test: The front 3 mm of Terminal should be immersed for 3 ± 0.5 seconds at 230 ±
5°C. Soldered area must be minimum 90% of the soldering surface.
Soldering Heat Resista
Approx.10gnce: When the Terminal are immersed into soldering bath at 350 °C for 3 seconds,
the Relay shall satisfy all electrical and mechanical specifications and must
not have excessive change in outside appearance.
Weight: Approx.3.5g
Sample Test Method: GB2828-2000 Level – General II, AQL 0.4
Factory Pack Quantity: 25
Price: 0.4-0.5
Contact Us
- Shenzhen Kexinxin Technology Co., Ltd.
- Contact nameAaron Lin Chat Now
- Phone86-0755-23617721
- AddressFutian, Shenzhen, Guangdong
Product Categories
New Products
-
MOSFET With High Quality Chip Transistor MOS New&original Price IRF7509TRPBF
-
IRFB4227 Electronic Components MOSFET Transistors
-
High Quality Ic Chips IRFBC40APBF Vishay MOSFETs Trans MOSFET N-CH 600V 6.2A 3-Pin(3+Tab) TO-220AB
-
ERA-3ARW432V Thin Film Resistors - SMD 0603 4.3Kohm 0.05% 10ppm AEC-Q200 Panasonic
-
C1608X7R1E104KT TDK Multilayer Ceramic Capacitors MLCC - SMD/SMT 0603 0.1uF 25volts X7R 10%
-
MBR30200CT Diotec Semiconductor Schottky Diodes & Rectifiers Schottky, TO-220AB, 200V, 30A
-
MBR30150CT Diotec Semiconductor Schottky Diodes & Rectifiers Schottky, TO-220AB, 150V, 30A
-
YGW75N65FP LUXIN-SEMI ?650V 75A TO-247
-
INA209AIPWR Texas Instruments Current & Power Monitors & Regulators Hi-Side Msmt Bi-Dir Current/Pwr Mon
-
TK17N65W,S1F Toshiba MOSFET Power MOSFET N-Channel
-
IPW60R099C7XKSA1 Infineon Technologies MOSFET HIGH POWER_NEW
-
IXA18-FBFF8-10.000MHZ ILSI CRYSTAL 10.0000MHZ 8PF SMD 10 MHz ±30ppm Crystal 8pF 100 Ohms 2-SMD, No Lead
-
G6RN-1-DC12 Omron Electronics General Purpose Relays Heavy-Duty SPDT 12VDC
-
P6KE15CA-E3/54 Vishay General Semiconductor ESD Suppressors / TVS Diodes 600W 15V Bidirect
-
1N5343BRLG onsemi Zener Diodes 7.5V 5W
-
1.5KE9.1A-E3/54 Vishay General Semiconductor ESD Suppressors / TVS Diodes 1500W 9.1V Unidirect
-
IRLML6401PBF Infineon / IR MOSFET IRLML6401TRPBF Infineon Technologies MOSFT P-Ch -4.3A 50mOhm 10nC Log Lvl
-
IRLML9303TRPBF Infineon Technologies MOSFET MOSFT P-Ch -30V -2.3A 165mOhm
-
IRLML0100TRPBF Infineon Technologies MOSFET MOSFT 100V 1.6A 220mOhm 2.5nC Qg
-
MBR0520LT1G onsemi Schottky Diodes & Rectifiers 0.5A 20V
-
BSS87,115 Nexperia MOSFET BSS87/SOT89/MPT3
-
1N5402 Diotec Semiconductor Rectifiers Diode, DO-201, 200V, 3A
-
SF34 Taiwan Semiconductor Rectifiers 3A 200V
-
GSIB2580-E3/45 Vishay General Semiconductor Bridge Rectifiers 800 Volt 25 Amp 350 Amp IFSM
Popular Searches
- contactor
- concrete block making machine
- dc contactor
- meter component
- block making machine
- brick making machine
- kwh meter
- wall panel machine
- wall panel making machine
- latching relay
- magnetic latching relay
- brick machine
- amr system
- chamber filter press
- electromagnetic relay
- aac block production line
- frame filter press
- intermediate relay
- meter housing
- prepayment meter
- amr
- brick shaping machine
- watthour meter
- 60a breaker
Recommended Products
- TRICONEX 8310 TRICONEX 8311 TRICONEX 8312 Power Module in Stock
- IS200VSVOH1B Mark VI Printed Circuit Board IS200VCRCH1B MR-S11-200-Z37
- EI813F 3BDH000022R1 Fieldbus module
- 810-068158-015 Robot interface board
- UFC760BE43 3BHE004573R0043 main control board
- UFC911B106 3BHE037864R0106 DC power supply module controller
- UFC911B108 3BHE037864R0108 Processor module
- UFC911B110 3BHE037864R0110 Analog expansion module
- UFC921A101 3BHE024855R0101 DC Power Supply Module Controller
- UFC760BE41 3BHE004573R0041 Main Control Board
- IS215UCVEH2A VME CONTROLLER CARD-VMIC IS215UCVEH2AB
- DDC779BE02 3BHE006805R0002 Circuit card assembly DDC779BE02
Find Similar Products By Category
- Electrical & Electronics > Relay & Contactor > Relay
Product Tags:
Shenzhen Kexinxin Technology Co., Ltd.
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Aaron Lin
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile