spot uv machine for automatic Reciprocating screen print

TM-JB-1050UVJ is specially designed for using with automatic screen press, offset machine and other equipments. It's widely used for d ying, dehumidifying and UV curing etc in the field of screen printing, dyeing, electroplating, electronic circuit board and so on.

UV-LED line light curing machine advantages:
    1, long life: life is more than 10 times that of traditional mercury type curing machine, about 25,000 to 30,000 hours. 
    2, cold light, no heat radiation, according to the product surface temperature is low, resolved optical communications, LCD production and long-standing problem of heat damage. Especially for liquid crystal Edge, film printing and other requirements applicable to small temperature rise of the occasion. 
    3, heat a small, solve the mercury inkjet equipment heat, staff unbearable problem. 
    4, instant light, no warm-up instantly reach 100% power UV output. 
    5, from the opening and closing times on life. 
    6, high energy, light output stable, good illumination uniformity effect, improve production efficiency. 
    7, the effective radiation area can be customized in length from 20mm to 1000mm. 
    8, the maximum illumination intensity of up to 6000mw / cm2. 
    9, do not contain mercury, it does not produce ozone, it is to replace traditional light source technology a safer, more environmentally friendly choice. 
    10, low energy consumption, power consumption is only 10% of the traditional mercury lamp type curing machine can save 90% power.
     11, small size, easy to carry, and only 1/8 the size of conventional mercury lamps.
     12, the maintenance cost is almost zero, using UV-LED curing equipment annual savings of at least 10,000 yuan / station supplies costs

UV LED curing is a kind of UV curing, which uses UV LED light source to cure UV ink, UV glue, UV coating and the like.

It is well known that ultraviolet light (UV light) was successfully promoted to commercial applications more than 30 years ago. Each adhesive manufacturer has developed a series of UV products for bonding, sealing, printing, etc. for UV curing characteristics, and is widely used in communication, electronics, optics, printing and many other fields. These products cure or harden (polymerize) under UV light (a certain wavelength and a certain light intensity), and are more efficient, energy-saving and environmentally friendly than conventional products - UV light curing.
TAMPRINTER UV LED curing machine Features Energy saving, environmental protection, high efficiency and safety

Characteristics
The equipment has also undergone continuous research and development and improvement. The production process in which mercury lamp irradiation is the mainstream has been used for a long time. However, due to the high cost of equipment, high maintenance cost, fast attenuation of UV light intensity, defects in surface temperature of the irradiated components, large volume, expensive consumables, mercury pollution, etc., the industry has been working hard to improve, but due to the limitations of the original hardware Hard to break through.
The advent of UV LEDs has revolutionized the UV curing industry. It has constant light intensity, excellent temperature control, portable and environmentally friendly features, relatively low procurement cost and almost zero maintenance cost, which promotes the quality improvement and energy saving of the UV curing process.
UV LED point sources, line sources, and surface sources have begun to be used in various industries. We believe that through the joint efforts of the whole industry, the future UV curing industry will certainly have a new world of environmental protection and energy conservation.
Service life
Compared with the traditional UV curing equipment, the mercury lamp has a service life of only 800-3000 hours, and the UV LED UV curing system has a service life of 20,000-30,000 hours. The LED method can be lit instantly only when ultraviolet light is required. When DUIY=1/5 (preparation time=5 irradiation time=1), the service life of the LED method is equivalent to 30-40 times that of the mercury lamp method. Reduced lamp replacement time: increased productivity and energy savings. However, when the conventional mercury lamp curing device is in operation, since the mercury lamp starts slowly and the opening and closing affects the life of the lamp, it must be always lit, which not only causes unnecessary power consumption but also shortens the working life of the mercury lamp.

Application field
Microelectronics Industry - UV Light Curing Applications [1]
1. Mobile phone component assembly (camera lens, earpiece, microphone, housing, LCD module, touch screen coating, etc.)
2. Hard disk head assembly (gold wire fixing, bearing, coil, die bonding, etc.)
3. DVD/digital camera (lens, lens bonding, board reinforcement)
4. Motor and component assembly (wire, coil fixed, coil end fixed, PTC/NTC component bonding, protective transformer core)
5. Semiconductor chip (moisture protection coating, wafer mask, wafer contamination inspection, UV tape exposure, wafer polishing inspection)
6. Sensor production (gas sensors, photoelectric sensors, fiber optic sensors, photoelectric encoders, etc.)
PCB industry LED UV curing application
1. Components (capacitors, inductors, various plug-ins, screws, chips, etc.) are fixed
2. Moisture proof potting and core circuit, chip protection, anti-oxidation coating protection
3. Circuit board type (corner) coating
4. Ground wire, flying wire, coil fixed
5. Wave soldering through hole mask