Guangzhou Yingpeng explosion-proof mobile air conditioning cold and warm models, 2 small pieces

model

BKFR-3.5/6A12K

Number of horses

2 small horses

Refrigeration capacity

3500w

Rated input power

1345w

Dehumidification capacity

1.3L/H

set up

24-hour timing setting

Air output

380m3/H

control

Remote control

noise

≤64db

Net weight

25kg

Applicable scope

22-25㎡

Product size

345L*370W*714

Explosion proof level

ExdibmbIICT4Gb

Product features:

Five major functions: refrigeration, heating, air supply, dehumidification, and purification

24-hour timing design

3 adjustable wind speeds, large LED screen display, and flexible touch buttons

Independent dehumidification with dedicated water outlet for dehumidification function

Cooling without drainage

High energy efficiency, environmentally friendly refrigerant (R410A/R290)

Double cooling and improve temperature control efficiency

Intelligent infrared remote control function

● Overcooling protection function

Refrigeration temperature adjustable from 16 ° C to 31 ° C

Fully automatic left and right swing air

be careful:

1: Mobile air conditioners will extract a portion of the indoor cold air for heat dissipation and discharge it outdoors. Therefore, the overall effect is not as good as split wall mounted air conditioners. Buyers should pay attention to this before purchasing. However, the local cooling effect of mobile air conditioners is very good, and in situations where split air conditioners cannot be installed or frequently move, it is very suitable for you to choose and save you the cost of "installation consumables" for split air conditioners, And can move freely in various fruit rooms.

2: The split air conditioner is relatively quiet because the noisy external unit is placed outdoors, and due to the integrated design of the internal and external units, the working sound of the mobile air conditioner will naturally be slightly louder than that of the split air conditioner. For specific information, you can refer to the working sound level of the high wind ceiling fan.

Mobile air conditioning, with its convenient and low-cost characteristics, is mainly suitable for: 1. offices, outdoor temporary command centers, open workshops and other public places; 2. Places such as computer rooms, equipment and instrument rooms with high precision requirements; 3. Multi purpose residential buildings, kitchens, etc. with one machine; 4. Frequent relocation and rental of building groups. Overall, places that are inconvenient to install outdoor units cannot do without mobile air conditioning.

Mobile explosion-proof air conditioners are processed and processed through special explosion-proof technology, and are widely used in hazardous areas such as scientific research, petroleum, chemical, pharmaceutical, processing and manufacturing, and biology, where there are Class IIA and IIB flammable gases, T1-T4 groups, steam, and air mixed to form explosive atmospheres. They are special temperature regulating air conditioning equipment designed for places with temperature control requirements. All series of products have passed the inspection of the explosion-proof electrical product quality supervision and testing center, Obtained explosion-proof electrical equipment explosion-proof certificate, with beautiful appearance, reasonable design, and convenient installation and maintenance.

The execution standards for this series of products are as follows:

GB3836.1-2010 Explosive Atmospheres - Part 1: General Requirements for Equipment

GB3836.2-2010 Explosive Atmospheres - Part 2: Equipment Protected by Flameproof Enclosures "d"

GB3836.4-2010 Explosive Atmospheres - Part 4: Equipment Protected by Intrinsically Safe "i"

GB3836.9-2006 "Electrical Equipment for Explosive Gas Atmospheres - Part 9: Encapsulated" m "

GB3836.15-2000 "Electrical Equipment for Explosive Gas Atmospheres - Part 15: Electrical Installation in Hazardous Areas (excluding Coal Mines)"

matters needing attention:

1、 Environmental temperature for product use

The ambient temperature used for the product is between 7-35 ℃. If it is below 7 ℃, it will damage the compressor. If it exceeds 35 ℃, the machine is prone to overload operation, which will affect its lifespan. The compressor will also trip and switch to air supply mode.

2、 Mobile air conditioning requires no professional installation

Connecting the exhaust and drainage pipes requires self installation, and the basic three steps can be completed within 5 minutes. Therefore, there is no need for a dedicated installation technician to come and install them. You can refer to the manual or installation video and simply install the exhaust pipe and baffle.

3、 Startup operation

1. Check if the filter screen and exhaust duct are installed correctly (they need to be installed in any mode, and in special cases, only local cooling is required, which can be omitted)

2. Check that the power supply is powered on and ensure that each side of the air conditioner is not less than 50cm away from the wall

3. Turn on the air conditioner

4、 The problem of fin deformation in radiators

1. Due to the low hardness of the fins themselves, transportation on the road may cause slight deformation on the radiator, but it will not affect normal use.

2. During the processing and welding process of air conditioning finned tube evaporators, the edges are prone to being baked by brazing flames, resulting in local discoloration and not affecting normal use. Small areas of yellowing are normal, and slight deformation does not affect the use of air conditioning.

5、 Machine does not start due to humid environment

Frequent rain can cause the air humidity to reach 80% or above. Due to the air saturation inside the condenser and radiator, the parts cannot be started, which may cause the compressor to not start.