SK fan and filter units TopTherm, 105/120 m3/h, 115 V, 1~, 50/60 Hz, WHD: 204 x 204 x 24 mm

WHATSAPP 008615959950473    mail:  137651048@qq.com

3239110 SK fan and filter units TopTherm, 105/120 m3/h, 115 V, 1~, 50/60 Hz, WHD: 204 x 204 x 24 mm

3238110 SK fan and filter units TopTherm, 55/66 m3/h, 115 V, 1~, 50/60 Hz, WHD: 148.5 x 148.5 x 16 mm

3238200 SK outlet filter, Standard, WHD: 148.5 x 148.5 x 24 mm

3241110 SK fan and filter units TopTherm, 230/250 m3/h, 115 V, 1~, 50/60 Hz, WHD: 255 x 255 x 25 mm

3240200 SK outlet filter, Standard, WHD: 255 x 255 x 25 mm

3172100 SK spare filter mats, for filter fans, for SK 3240…/3241…, WHD: 221 x 221 x 17 mm

1050250 XCA1050250, WM202008NC Enclosure, 20Hx20Wx8"D, Hinged, w/ backplate, Nema 1/12/3R/4, MTL, LT.GRY

3173100 SK spare filter mats, for filter fans, for SK 3243…/3244…/3245…, WHD: 289 x 289 x 17 mm

3110000 SK Thermostat, enclosure internal thermostat, 24-230 V, 1~, 24-60 V (DC), Colour RAL 7035, WHD: 71 x 71 x 33.5 mm

3243200 SK outlet filter, Standard, WHD: 323 x 323 x 25 mm

3237200 SK outlet filter, Standard, WHD: 116.5 x 116.5 x 16 mm

2500300 SZ System Light LED, 1200 Lumen, L: 437 mm, 100-240 V, with integral motion detector

3239200 SK outlet filter, Standard, WHD: 204 x 204 x 24 mm

3243110 SK fan and filter units TopTherm, 550/600 m3/h, 115 V, 1~, 50/60 Hz, WHD: 323 x 323 x 25 mm

3244110 SK fan and filter units TopTherm, 700/770 m3/h, 115 V, 1~, 50/60 Hz, WHD: 323 x 323 x 25 mm

1060250 WM242408NC Enclosure, 24Hx24Wx8"D, Hinged, w/ backplate, Nema 1/12/3R/4, MTL, LT.GRY.

1045250 These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

3237124 SK fan and filter units TopTherm, 20 m3/h, 24 V (DC), WHD: 116.5 x 116.5 x 16 mm

3183100 SK fine filter mats, for filter fans, for SK 3243…/3244…/3245…, WHD: 289 x 289 x 12 mm

8017544 WM202408NCWM 20X24X8 CARBON STEEL 7035

4377000 SZ TS punched section without mounting flange, 23 x 73 mm, for TS, SE, for WHD: 800 mm, L: 695 mm

3240060 SK outlet filter, EMC, WHD: 255 x 255 x 25 mm

2374000 SG Mounting component for conduit mounting, for signal pillar, modular and LED-compact, Base with integral conduit, ? 25 mm, L: 110 mm

8802120 TS profile for cable entry, centered, for TS, VX SE, TP, for W: 1200 mm

9516000 PK Polycarbonate enclosure, WHD: 180x110x165 mm, fibreglass-reinforced polycarbonate, without knockouts, with grey cover

6664100 CP Tilting adaptor 10°, CP 40, stainless steel, 1.4305

9672188 SV Partial door, WH: 800x800 mm, for TS

5051.035 VX Mounting Plate 600 x 1600

8018129 JB080604H4JB 8X6X4 HINGED 304 SS N4X

2400300 SZ Connector gland, small, for 2 cable ? 6-8 mm

6660010 CP Support section CP 40, solid, L: 1000 mm, stainless steel, 1.4301

2503020 SZ Wall mounting bracket, for AX and KX, sheet steel, wall distance: 40 mm

1513000 KX Terminal box, WHD: 800x400x120 mm, sheet steel, without mounting plate, with cover, without gland plate

9975045 SWING PANEL WMSP3630C

2350000 SZ Cable clamp, for cable clamp rail, for cables ? 6-12 mm

2571100 SZ Metal gland plate, for AX, with metric knockouts, WD: 256x149 mm, for gland plates size 1

5050147 TS Locking rod, adjacent door

2376001 SG acoustic component, 95 - 105 dB

2500600 SZ Jack, for power supply and through-wiring, 3-pole, 100-240 V, Connection accessories for self-assembly

8612260 TS Punched rail 18 x 38 mm, for W/D: 600 mm

3396268 SK RADIALVENT.R2E133BH72-24

3105310 SK enclosure heater, without fan, 8-10 W, 110-240 V, 1~, 50/60 Hz, WHD: 45 x 120 x 46 mm

2541235 SK Integrated louvres, Sheet steel, WHD: 160 x 110 x 8 mm

2519200 CM Door stay, for CM, TP

3243060 SK outlet filter, EMC, WHD: 323 x 323 x 25 mm

5050621 HD Gasket profile 150x150MM

1577000 KX E-Box, WHD: 300x400x155 mm, sheet steel, with mounting plate, with door

9340290 SV Inserted strip, for OM adaptor/support, W: 10 mm

8612580 TS TS punched section with mounting flange, 23 x 73 mm, for inner mounting level: W/D: 800 mm

1001600 AE Compact enclosure, WHD: 200x300x120 mm, Stainless steel 1.4301, with mounting plate, single-door, with one cam lock

6218300 CP Coupling CP 180, for support arm connection ? 130 mm

1100000 AX Compact enclosure, WHD: 1000x760x210 mm, sheet steel, with mounting plate, two-door, with two cam locks

8018236 Seals unused or empty pushbutton holes, conduit openings, and knockout openings. Protects against the ingress of dirt, dust, oil, and water.

6218820 CP Wall/base mounting bracket CP 180, small

9672326 SV Front trim panel, for TS, top, WH: 600x300 mm, protection category IP 54

9975046 SWING PANEL WMSP3636C

8620094 VX Base/plinth trim panel, with brush strip, for W/D: 1000 mm

9344010 SV NH fuse-switch disconnector, size 00, 160 A, 690 V, 3-pole, screw M8, for mounting plate assembly

8017648 The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

5051368 "AX Mounting plate For enclosure WxH 300x300"

3396267 SK RADIAL FAN R2E133BH72-26

2467000 SZ Semi-cylinder for handle systems, lock-insert locking Nr. 3524 E

6148000 CP Twin castors, je 2 with/without lock, static load per castor 75 kg

6664300 CP Angle piece 90°, CP 40, stainless steel, 1.4305

9340200 SV Cover section, L: 700 mm

9964893 SIDEWALLS 2200 x 500

4638800 PS Utility lectern, for TS, SE, CM, PC, for door width 800 mm

1684600 HD Switch housing 1.4301 for 4 Switches d=22,5 mm

8018414 FSK2410C

2459500 SZ Pressure relief stoppers

8019510 Door for WM

5051313 Replacement hinge for AX Series

9635010 SV Board, 125 A, 690 V (AC). 600 V (DC), 3-pole, WHD: 405x160x45,1 mm

8018822 The consolet is one-piece enclosure body with 30 or 60 degree slope depending on orientation. The pedestal column is designed to be used in conjunction with the pedestal base.

3031000 SV Base isolator, H: 40 mm, thread M10

8017534 WM241606NCWM 24X16X6 CARBON STEEL 7035

8619440 VX Cable clamp rail, mounting angle, for W: 1200 mm

8018411 FSK1810C

6212640 CP Adaptor, for support arm combination CP 120/60

6206400 CP Tilting adaptor 10°, CP 60/120, for support arm connection ? 130 mm

9673662 For attaching directly to the compartment side panel modules for internal separation. Universal internal installation with switchgear and control devices. Creation of additional mounting levels. In combination with functional space dividers and side panel modules, internal separation in accordance with Form 2, 3 or 4 is possible.

9975007 The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.

3285800 SK filter mat, for cooling unit 3185.830, WHD: 360 x 297 x 10 mm

8800110 TS Hinge for side panel, screw-fastened, sheet steel

8018462 WK2315C

8612560 TS TS punched section with mounting flange, 23 x 73 mm, for inner mounting level: W/D: 600 mm

2410021 HD Cable gland, stainless steel 1.4305, size: M20x1,5, for cables ? 6-12 mm, Standard version

4315820 SZ Door-operated switch, for System light LED compact, L: 1000 mm, with LED interconnecting cable

1180000 AX Compact enclosure, WHD: 800x1000x300 mm, sheet steel, with mounting plate, single-door, with two cam locks

3105380 SK enclosure heater, with fan, 250/265 W, 230 V, 1~, 50/60 Hz, WHD: 103 x 200 x 103 mm

5050177 TS DOOR LH 600x1800 RAL7035

5050052 Rittal, 5050052, TS Locking rod, main door H: 2000 mm

2351000 SZ Cable clamp, for cable clamp rail, for cables ? 12-16 mm

8017559 WM423608NCWM 42X36X8 CARBON STEEL 7035

9345610 SV Circuit-breaker component adaptor, 250 A, 690 V, 3-pole, cable outlet bottom, with connection straps

2500490 VX Mounting kit magnet, for LED system light

8018895 WMQTLA

8950850 TS TS isolator door cover (US version), WHD: 100x2000x600 mm

5058023 Repair service

8018459 WK1711C

2372011 SG LED steady light component, green

2372021 SG LED steady light component, yellow

2372001 SG LED steady light component, red

8609860 TS Divider panel, for TS, for WD: 1800x600 mm

8018113 JB161406H4JB 16X14X6 HINGED 304 SS N4X

1446000 AX compact enclosure, fiberglass-reinforced polyester, WHD: 400x600x200 mm

5502100 DK Cable duct, 38 U, for TS IT, Height 1800 mm: with mountingframe, Height 2000 mm: with profiles

5050149 Not suitable for use with TS IT and SK air-conditioning doors.

9951145 Includes operator handle interlocking kit to securely lock most commercially available operator handles to enclosure and door latch

8018144 JB100806H6JB 10X8X6 HINGED 316 SS N4X

2500460 SZ Door-operated switch, with connection wire, L: 800 mm, black

6206900 CP Mounting component, for signal pillar, modular and LED-compact, for support arm system CP 60

3396251 SK RADIALVENT.R2E133BH66-34

2092200 EL Captive nuts, M6, Without contact, For metal thickness: 0,8-2,5 mm

8802125 TS profile for cable entry, rear, for TS, VX SE, TP, for W: 1200 mm

3286880 SK Stoppers, for cooling unit SK 3209/3210/3273/3383/3384/3385, ? 100 mm

6013000 CP Clipboard

3322720 SK Pleated filter IP54 for 3238.xxx for filter fans, 1 PU = 5 pcc

8018828 The consolet is one-piece enclosure body with 30 or 60 degree slope depending on orientation. The pedestal column is designed to be used in conjunction with the pedestal base.

9951159 SERIE TS FMDC BLANK ADAPTER PLATE

2500210 SZ System Light LED, 900 Lumen, L: 437 mm, 100-240 V, with earthing-pin socket

8018145 JB080804H6JB 8X8X4 HINGED 316 SS N4X

1676600 HD Terminal box, WHD: 400x300x120 mm, Stainless steel 1.4301, with cover and silicone seal

9673686 For attaching directly to the compartment side panel modules for internal separation. Universal internal installation with switchgear and control devices. Creation of additional mounting levels. In combination with functional space dividers and side panel modules, internal separation in accordance with Form 2, 3 or 4 is possible.

8609040 TS Divider panel, for TS, for WD: 2000x400 mm

8017616 Model no:8017616  Cutout for HMI cut-out in the door (308mm x 263mm)

XCA8013248 "L-FJ1614CHNFQX 17.53 X 15.43 X 7.71Legacy Fibreglass – Extended Depth Lockable Quick Release Boxes

Quick release clamps with secure loop for padlock provisions (padlock not included)

Can be lifted and released with ease

180? door opening

Foamed-in-place polyurethane gasketing

NEMA 1, 3, 4X, 6P, 12

UL, cUL and CSA"

3398354 SK I/O BoardSK I/O Board

7826605 DK-TS8 Roof plate, WxD: 600x1000 mm, 2-part, For cable entry

3527000 SV PLS special busbar E-Cu, L: 495 mm, PLS 1600, bar thickness: 10 mm, 900 mm2 bar cross-section

7156035 DK Blanking panel, 482.6 mm (19"), 6 U, Installation height: 266 mm, RAL 7035

3396785 SK Radial fan

2368001 SG connection component for tube

3240100 SK fan and filter units TopTherm, 180/160 m3/h, 230 V, 1~, 50/60 Hz, WHD: 255 x 255 x 25 mm

3396665 SK RTT PWR BRD, COMFORT, 230V

9342110 SV Base tray, L: 700 mm (PLS 1600)

2568000 SZ Earth strap, connection: M8-M8, for diameter 16 mm2, L: 300 mm

7119400 DK Component shelf, WHD: 482,6x2 Ux400 mm, 25 kg, static, distance between levels:, static installation, For 482.6 mm (19") system punchings, RAL 7035

5051023 VX Mountingplate WxH 1000x1800

9963522 Floor stand kit for SE8 / TS8 enclosures. Material carbon steel, stainless steel 304, or stainless steel 316L.

3396316 Rittal, 3396316, SK  Radial  Fan

9517000 PK Polycarbonate enclosure, WHD: 182x180x90 mm, fibreglass-reinforced polycarbonate, without knockouts, with grey cover

8018120 JB060403HCJB 6X4X3 HINGED COVER N4

6315650 AX Operating housing with handle strips, WHD: 600x600x210 mm, sheet steel, aluminium handle strips, servicing access from the front

1466000 AX compact enclosure, fiberglass-reinforced polyester, WHD: 600x600x200 mm

1508000 KX Terminal box, WHD: 400x300x120 mm, sheet steel, without mounting plate, with cover, without gland plate

8017646 The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

3574005 SV Laminated copper bar, WH: 32x10 mm, L: 2000 mm

8105245 VX Panneau latéral à visser RAL7035-IP55 pour HT: 2000x500 mm, 1 PU = 2 pcs pour HT: 2000x500 mm, 1 PU = 2 pcs

2546000 SZ Enclosure key, 8 mm triangular

5050805 VX SE Porte gauche L500xH1800

8017726 The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

2509010 AX Eyebolts

8800590 TS Quick-fit baying clamp, three-piece, for TS/TS

8018122 JB120604HCJB 12X6X4 HINGED COVER N4

9342100 SV Base tray, L: 500 mm (PLS 1600)

9672162 SV Partial door, WH: 600x200 mm, for TS

3182125 SK folded filter IP55, for filter fan/outlet filter 3240./3241.xxx, WHD: 212.5x212.5x21 mm

6218200 CP Support section CP 180, solid, L: 2000 mm

5050065 Rittal, 5050065, TS REAR PANEL 800x2000 RAL7035

3396732 SK Radial fan

8620092 VX Base/plinth trim panel, with brush strip, for W/D: 600 mm

8018153 JB121008H6JB 12X10X8 HINGED 316 SS N4X

8017580 These flange mount disconnect wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

9851518 WM302412N63PT

8017624 WM202008N6WM 20X20X8 316 #4 BRUSHED

9851539 These flange mount disconnect wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

9672186 SV Partial door, WH: 800x600 mm, for TS

9340340 SV OM adaptor, 25 A, 690 V, 3-pole, connection cable AWG 12, WH: 45x208 mm, support frame, support rail TS 45C

4050217 Spare battery for assembly frame

3396010 SK RTT COND FAN R2E225AT F/3305100/110/500/510

9672163 SV Partial door, WH: 600x300 mm, for TS

4315800 SZ Connection cable, for System light LED compact, L: 3000 mm

8018979 "WM302612XC

WM 30X26X12 FMD CARBON STEEL 7035"

3397568 RTT EVAP COIL F.3328,3329

3398286 SK Radial fan

6212720 CP Top-mounted joint CP 120, outlet vertical

3515000 SV Busbar connector, PLS 1600, bayed connection

3397758 CONNECTING PLUG RTT 230V

9340030 SV Busbar support, 1-pole, for busbar WH: 12x5-30x10 mm

3397693 SK COMPRESSOR RK 5480Y L UNITE

5051029 VX Mountingplate WxH 1200x2000

8017687 PB-03305X1C

8017571 WM603610NCWM 60X36X10 CARBON STEEL 7035

9345200 SV Fuse holder, Class J, 101-200 A, 600 V, 3-pole, (60 mm)

8018606 Mounting plate for WM

9635371 SV component adaptor 16 A, 690 V (AC), 1-pole (variant L1), connection cable AWG 14, WH: 18 x 160 mm

8800410 TS Baying clamp, vertical, for TS/TS

6663500 CP Wall/base mounting bracket, swivel, CP 40, rear mounting, stainless steel, 1.4305

9320120 SV Support rail 35x15 mm, W: 72 mm, sheet steel

8017685 PB01305X1C PUSHBUTTON ENCLOSURE

2433500 SZ Wall mounting bracket, stainless steel, 1.4404, Wall distance 10 mm

9963526 Floor stand kit for SE8 / TS8 enclosures. Material carbon steel, stainless steel 304, or stainless steel 316L.

9635210 SV Connection adaptor, 125 A, 690 V (AC), 600 V (DC), 3-pole, cable outlet top/bottom, round conductor connection 6-50 mm2

3586005 SV Busbar E-Cu, WH: 30x10 mm, L: 2400 mm

8611310 For safety locking of enclosures and bayed suites in conjunction with disconnect switches rated to less than 200 amps. Includes interlock activator part number 4912000. PS 4911000 and interconnecting rods required for bayed suites. Included with master flange mount disconnect TS 8.

3398293 SK Radial fan

1091000 AX Compact enclosure, WHD: 600x1000x400 mm, sheet steel, with mounting plate, single-door, with two cam locks

3396.695 SK SOLENOID VALVE BRASS 3/8 230V

1010600 AE Compact enclosure, WHD: 600x600x210 mm, Stainless steel 1.4301, with mounting plate, single-door, with two cam locks

4396000 TS support rail, for VX, TS, VX SE, for W/D: 600 mm, perforated

8620095 VX Base/plinth trim panel, with brush strip, for W/D: 1200 mm

8017621 WM241608N4WM 24X16X8 304 #4 BRUSHED

1004600 AE Compact enclosure, WHD: 380x300x155 mm, Stainless steel 1.4301, with mounting plate, single-door, with one cam lock

1506000 KX Terminal box, WHD: 600x200x120 mm, sheet steel, without mounting plate, with cover, without gland plate

1540000 KX Terminal box, WHD: 600x400x120 mm, sheet steel, without mounting plate, with cover, with gland plate

6218740 CP Wall-mounted hinge CP 180, outlet horizontal

9340780 SV OM adaptor, 16 A, 690 V, 3-pole, connection cable AWG 12, WH: 45x208 mm, support frame, support rail TS 45D, TS 45D-V

8018115 JB121206H6JB 12X12X6 HINGED 316 SS N4X

2389000 SZ Handle set

1570800 KX Mounting plate, for terminal boxes KX and bus enclosures KX, WH: 275x585 mm

8801450 TS Lockable and adjacent door, for TS, TS IT, SE, for WH: 800x2000 mm

6375010 CP Handle set, for Comfort-Panel

2571000 SZ Lock cylinder, version B, with lock cylinder insert, Lock no. 3524 E

3396277 POWER BOARD FOR A/C SK REGLER 230V COMFORT

1012600 AE Compact enclosure, WHD: 600x760x210 mm, Stainless steel 1.4301, with mounting plate, single-door, with two cam locks

2372041 SG LED steady light component, blue

8618541 VX Pann lat pour module de montage

2372031 SG LED steady light component, clear

4583000 SZ Door stay, for TS, SE, universal console TP, PC

3572005 SV Laminated copper bar, WH: 24x10 mm, L: 2000 mm

2342235 SR Swing frame, large, with trim panel, for TS, VX SE, for W: 800 mm, (40 U), Mounting position centre

8017592 These flange mount disconnect wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

9340410 SV OM adaptor, 65 A, 690 V, 3-pole, connection cable AWG 6, WH: 55x208 mm, support rail TS 55E

9518100 PK Polycarbonate enclosure, WHD: 182x180x111 mm, fibreglass-reinforced polycarbonate, without knockouts, with transparent cover

8175235 TS Side panel, screw-fastened, for TS, TS IT, for WD: 1200x800 mm, Sheet steel

8017664 PB-01225M1C

8800130 TS support strip, for TS, VX SE, TP, for inner mounting level: for W/D: 600 mm, L: 590 mm

1755500 Spray-finished enclosure with door and mounting plate of sheet steel. Protection category IP 66. For the North American market, we have enhanced our product offerings to include the below additional size options.

8017615 WM363008N4WM 36X30X8 304 #4 BRUSHED

4538000 TS Ride-up roller, for TS, SE, PC

2486600 VX Metal multi-tooth screw, for sheet steel, size: 5.5x13 mm

2460000 SZ Lock insert, version A, Die-cast zinc, 7 mm square, L: 27 mm

9341070 SV End cover, for busbar support, SV 9341000/050

8017596 These flange mount disconnect wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

9851501 These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a stainless steel body and door, and a zinc plated mounting panel.

2592000 SZ Cable conduit holder, for cable conduit ? 48 mm

1589000 KX Terminal box, WHD: 400x150x120 mm, sheet steel, without mounting plate, with cover, without gland plate

4598000 TS support strip, for TS, VX SE, TP, for door width: 800 mm, L: 690 mm

1468500 KS Plastic enclosure, WHD: 600x800x300 mm, Fibreglass-reinforced unsaturated polyester, with mounting plate, with door

9673683 For attaching directly to the compartment side panel modules for internal separation. Universal internal installation with switchgear and control devices. Creation of additional mounting levels. In combination with functional space dividers and side panel modules, internal separation in accordance with Form 2, 3 or 4 is possible.

8108245 VX Side panel, screw-fastened 2000x800 mm

9672183 SV Partial door, WH: 800x300 mm, for TS

8018112 JB141206H4JB 14X12X6 HINGED 304 SS N4X

8611080 TS Handle adaptor for comfort handle, for glazed door TS, RAL 7035

5050518 KL Accessory bag with 4 bolts

5830609 5830600 Modified

8617505 VX baying kit for VX / TS

2364000 SZ PE busbar, L: 699 mm

9673062 Side divider panel for compartments, locates into the TS hole pattern. Prepared for the location of mounting brackets for horizontal functional space dividers or mounting plates. Two TS system punchings allow the use of additional TS accessories. The side panel modules for reduced functional space depth and an auxiliary construction using TS punched rails 17 x 17 mm can be used to provide a separate enclosure space in the side panel area, e.g., for the provision of a busbar system.

6205100 CP Mounting bracket, for interior installation, for Comfort Panel and Optipanel

8610805 TS Glazed door, for TS, TS IT, SE, for WH: 800x2000 mm

9341130 SV Base tray, L: 1100 mm (PLS 800)

9340220 SV Support panel, for cover section, SV 9640200/210

8018579 L handle for stainless steel WM enclosures with 3-point latching

1549000 KX E-Box, WHD: 200x200x120 mm, sheet steel, with mounting plate, with door

1517000 KX Terminal box, WHD: 300x200x80 mm, sheet steel, without mounting plate, with cover, without gland plate

9672316 SV Front trim panel, for TS, top, WH: 600x100 mm, protection category IP 54

1500000 KX Terminal box, WHD: 150x150x120 mm, sheet steel, without mounting plate, with cover, without gland plate

8018695 WM-S201612N4

8625500 For the North American market, we have enhanced our product offerings to include the below additional size options. Baying systems TS 8 with mounting plate. Protection category IP 55.

9673485 For the horizontal separation of compartments. In combination with the side panel modules, creates separation to Form 3 or 4.

XCA8013330 L-MPLJ2016CS 17.00 X 13.00

5051096 VX Single door WxH 800x2000

2515300 AX Sheet steel wiring plan pocket, width-variable, L: 475 - 575 mm , for door width 600 mm

9965641 L HANDLE F/WM W/PADLOCK W/DEFEATOR W/COIN SLOT, BLACK

8617730 VX Punched rail 18 x 39 mm

6539010 CP Command panel housing with door, WHD: 600x400x150 mm, Stainless steel 1.4301

5831609 5831600 modified

8406500 TS ENCLOSURE RAL 7035 BHT 400X2000X600 MM

3396258 SK RADIALVENT.RB2C 190/060

8950060 TS TS isolator door cover (US version), WHD: 100x1800x500 mm

2533000 SZ Plastic handle, version B, without lock cylinder insert

8018515 WM483616N4WM 48X36X16 304 #4 BRUSHED

8017550 WM244208NCWM 24X42X8 CARBON STEEL 7035

8018453 WK1308C

9851.503 WM242412N43PT

8800040 TS Lock component, for TS, TS IT, SE

3105350 SK enclosure heater, without fan, 63-75 W, 110-240 V, 1~, 50/60 Hz, WHD: 64 x 230 x 56 mm

8017618 WM362408N4WM 36X24X8 304 #4 BRUSHED

9522000 PK Polycarbonate enclosure, WHD: 254x180x165 mm, fibreglass-reinforced polycarbonate, without knockouts, with grey cover

6717500 TP TopConsole system, desk unit for 3-part assembly, WD 1600x730 mm, carbon steel

1515000 KX Terminal box, WHD: 300x150x80 mm, sheet steel, without mounting plate, with cover, without gland plate

9340120 SV Base tray, L: 900 mm

6106200 CP Pedestal base plate modular, large, CP 60, WHD: 490x100x600 mm

8612680 TS TS punched section without mounting flange, 45 x 88 mm, for inner mounting level: for WD: 800 mm

8017560 WM483608NCWM 48X36X8 CARBON STEEL 7035

7078000 DK cable clamps, for cable diameter ?: 12 - 18 mm

5050167 TS DOOR LH 500x2000 RAL7035

1031000 AX Compact enclosure, WHD: 380x300x210 mm, sheet steel, with mounting plate, single-door, with one cam lock

9977488 To bay 316 Stainless Steel Enclosure Systems

9673064 Side divider panel for compartments, locates into the TS hole pattern. Prepared for the location of mounting brackets for horizontal functional space dividers or mounting plates. Two TS system punchings allow the use of additional TS accessories. The side panel modules for reduced functional space depth and an auxiliary construction using TS punched rails 17 x 17 mm can be used to provide a separate enclosure space in the side panel area, e.g., for the provision of a busbar system.

3396257 SK RADIALVENT.RB2C 225

8017667 PB-04225M1C

2384010 SM Switch housing, WHD: 100x100x90 mm, Stainless steel 1.4301, without mounting plate, 1 switch cut-out

7094130 DK Multi-tooth screws, M5 x 16 mm, Bitgr??e: 25

4695000 TS support strip, for VX, TS, VX SE, TP, for outer mounting level: for W/D: 500 mm, L: 440 mm

7097220 DK cable clamps, for cable diameter ?: 22 - 26 mm

8018514 These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a stainless steel body and door, and a zinc plated mounting panel.

8018139 JB121008H4JB 12X10X8 HINGED 304 SS N4X

4944000 SZ C rail 30/15 to EN 60 715, for TS, SE, for W/D: 600 mm, L: 555 mm

1580000 KL Wall mounting bracket, brass, nickel-plated, Wall distance 8 mm

8800885 TS Baying cover, top, for D: 800 mm, Plastic, RAL 7035

3092000 SV Busbar cover section, for demension WH: 12x5-30x10 mm, L: 1000 mm/section

9973103 Door for TS

5051024 "VX Mountingplate WxH 1000x2000

For enclosure WxH 1000x2000"

7829300 TS DK SWIVEL HANDLE RAL7035 -

3105360 SK enclosure heater, without fan, 86-100 W, 110-240 V, 1~, 50/60 Hz, WHD: 90 x 165 x 75 mm

1575000 KX E-Box, WHD: 300x300x155 mm, sheet steel, with mounting plate, with door

5050165 TS DOOR RH 500x2000 RAL7035

1110000 AX Compact enclosure, WHD: 1000x1000x300 mm, sheet steel, with mounting plate, two-door, with two cam locks

8618521 VX Top-mounting module for WD 1000x600mm H:200mm

9963530 Floor stand kit for SE8 / TS8 enclosures. Material carbon steel, stainless steel 304, or stainless steel 316L.

2500520 SZ Connection cable, for power supply, 2-pole, 100-240 V, L: 3000 mm, UL

6681000 Premium panel made from stainless steel 1.4301 (AISI 304), resistant to high-pressure cleaning, protection category IP 69K.

6206460 CP Tilting adaptor +100°/-60°, CP 60/120, for support arm connection 120 x 65 mm

3397496 SK-A/C Spare Part-Compressor for 3386

1017600 AE Compact enclosure, WHD: 800x1200x300 mm, Stainless steel 1.4301, with mounting plate, single-door, 3-point lock system

3396733 Inverter

9340390 SV OM adaptor, 32 A, 690 V, 3-pole, connection cable AWG 10, WH: 45x272 mm, support frame, support rail TS 45D, TS 45D-V

8017554 WM362408NCWM 36X24X8 CARBON STEEL 7035

1480000 AX compact enclosure, fiberglass-reinforced polyester, WHD: 800x1000x300 mm

8018418 For mounting wallmount enclosures to the floor in accordance with floormount standards. Stainless steel 1.4301 (AISI 304), 12ga, Brushed Finish.

5050681 TP Cover 6710/14/6746 BxT 592x516

2543235 SK Integrated louvres, Sheet steel, WHD: 330 x 110 x 8 mm

RIT5051300 AX Accessory bag

8018705 WM-S363012N4

3397341 FLOW SWITCH F.3320,3334 SK 3320 500

2394300 AX rail for interior installation, for D: 300 mm

3396317 Radial fan

8018981 These flange mount disconnect wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

8405500 For the North American market, we have enhanced our product offerings to include the below additional size options. Baying systems TS 8 with mounting plate. Protection category IP 55.

1116199:MODCA:116322:001 "Enclosure Part Number 1116000

Product Family AX

Width 1,200.0 mm

Height / Length 1,200.0 mm

depth 400.0 mm

Coloring RAL7035 structure standard

Drawing number TO BE PROVIDED

Modification Group Enclosure Modified

Enclosure Modification modified"