Tensile Tester

• 
  

• USES AND METHOD

Tensile Tester TST-01 is used to test the mechanical properties of various materials such as stretching, tension, tearing, peeling, deformation, seal strength, adhesiveness, puncture force, etc.  It is suitable for plastic films, sheets, composite materials, paper, rubber, textiles, medical packaging, etc.   It's specially designed for plastic film testing by standard ASTM D882. 

The physical and mechanical performance test in the field is a necessary tool for various material manufacturers and research institutions to conduct physical property tests, research, and quality control. 

The sample is clamped between the two jaws upper and lower, and the two jaws move from each other.  By the loadcell located on the moving jaw and the motor rotating frequency record, the force value and displacement change during the test are collected, so as to calculate the tensile, tearing, elongation rate and other performance indexes of the sample.

Features

7 inch TFT touch screen operation

PLC control

Precision ball screw

Test speed adjustable.

Multiple fixtures available

Limiting device and automatic returning function ensure safe operation.

Multiple test items available.

Microprinter(optional)

RS 232 port and professional software(optional)

TECHNICAL DATE

Test Range: 0-500N (Standard, 50N,100N,200N are optional)

Stroke: 800mm (other stroke available)

Test Speed: 1~500mm/min

Displacement Accuracy: 0.01mm

Accuracy: 0.5% F.S.

Sample Width: 27mm (other optional)

Control: PLC and human machine interface

STANDARS

ISO 37, ASTM D882, ASTM E4, ASTM D3330, ASTM F904,ASTM F88, ASTM D1938, JIS P8113