German technical background VOK-SLIP-AYDVOK FS 444 Leveling agent Can increase surface smoothness replaces Elementis SLIP-AYDVOK FS 444

German technical background VOK?- SLIP-AYDVOK FS 444 leveling agent

Product introduction

VOK?- SLIP-AYDVOK FS 444 is a liquid additive that can increase surface smoothness and wear resistance, and is suitable for water-based and high-grade solvent-based coatings.

Physical characteristics:

Appearance characteristics: transparent liquid

Active ingredient: 50%

PH value, 1% solution (ASTM D 1172): 8.5

Density at 25 ℃ (DIN 53217/3): about 980Kg/m3

Viscosity at 25 ℃ (ASTM D 2669): max. 200mPa. s

Flash point (ASTM D 1172): 80 ℃ maximum

Composition: modified polysiloxane

Solvent: Dipropylene glycol ether

application area 

Automobile finish paint; Wood bright paint; Ink; Leatherwear; Various other industrial paints include air-drying paint and baking paint.

Main characteristics

A small amount of addition can improve the scratch resistance of smooth surface and dry film;

Improve the "coin scratch" resistance. Coin scratch is used to describe the marks produced by coins or similar metal scraping the coating surface;

Improve the wetting and arrangement of the matting powder, and improve the transparency and feel of the fog coating film;

Compared with general silicone resin or surface modifier, VOK?-SLIP-AYD FS444 shows good compatibility and has little negative impact on recoating.

characteristic

Low addition

Wide compatibility

Effect: increase surface smoothness and scratch resistance

Good acid-base stability

VOK?- SLIP-AYD FS444 is a polysiloxane surfactant, which is compatible with most waterborne coatings, including waterborne polyurethane, waterborne aminoalkyd, two-component acrylic acid, epoxy resin and nitrocellulose, UV-curable coating and air-dried alkyd paint;

Good acid and alkali resistance to hydrolysis.

usage method

The recommended dosage is 0.04-0.3% of the total formula, which should be added before the process paint mixing stage.