YX33-188-940 integrated wall panel manufacturers

YX33-188-940 profiled color steel plate, can also be called YX33-188-940 color steel plate, YX33-188-940 color steel tile, YX33-188-940 profiled steel plate, YX33-188-940 Wall panels, etc., using 1200mm unfolded width color coated steel plate roll cold bending forming, the formed profiled steel plate wave height is 33mm, the wave pitch is 188mm, and the effective width is 940mm.

The exterior finish of the wall is divided into indoor wall and outdoor wall. Wall decoration is an integral part of architectural design. Modern indoor walls use color and texture changes to beautify the indoor environment, adjust illuminance, and select a variety of materials with easy cleaning and good physical properties to meet the use of various functions.

First, the characteristics of the wall panel

Light weight, equivalent to 1/30 of the brick wall, while the effect of thermal insulation is very good. Secondly, the strength is high, and the bending and compression resistance are especially used in suspended ceilings, partitions and other places. Again, it is convenient, time-saving, and material-saving during the installation process, and it can also be cut at will, and the appearance color is bright and bright is a product in building materials. Integrated wall panel manufacturers as a convenient and practical color steel plate, under the premise of meeting the requirements of building thermal insulation, sound insulation, fire prevention, etc., has achieved the goal of high quality, efficiency, reliability and safety, has been recognized by the majority of users, more respected emerging materials.

2. YX33-188-940 wall material

1. The profiled steel plate is generally cold-rolled from 0.75~1.6mm thick Q235 thin steel plate. The net thickness of the profiled steel plate used for the composite plate (excluding the thickness of the galvanized layer or the finishing layer) is not less than 0.75mm.

2. For the profiled steel plate of the composite board and the non-composite board, the wall panel manufacturer should use galvanized steel plate. The profiled steel plate used as a composite plate, its galvanizing thickness should still meet the requirements of no rust during use.

3. The steel plate and steel beam are bolted steel connected by bolts, which is generally the same as the material of the steel beam connected to them.