German technical background VOK-358N leveling agent Used in solventborne coating systems to improve leveling replaces BYK-358N

German technical background  VOK? -FL 358N leveling agent

VOK?-FL 358N is a polyacrylate-based surface additive for improved leveling in solventborne coating systems and plastic systems curing at room temperature. Used in medium-polar to polar systems. 

Product information 

Chemical composition 

Polyacrylate solution 

Typical physicochemical data 

The data presented on this data page is typical and not a product specification. 

Density (20 °C): 0.95 g/ml 

Non-volatile content (10 min., 150 °C): 52% 

Solvent: Alkyl benzene 

Flash point: 47 °C 

Special considerations 

The solvent-free version of the additive is VOK?-FL 361N. 

Application areas 

Coatings industry 

Product Features & Benefits This additive is used as an anti-crater and leveling additive for various solventborne coatings. Increases gloss and creates a long-wave effect on the coating. Slightly reduces surface tension without affecting recoating and interlayer adhesion. VOK?-FL 358N does not cause cloudiness in the varnish and does not cause fog shadows in the pigment. The additive is thermally stable. 

Recommended dosage 

0.1-1% additive dosage (purchased form) is based on total formulation. 

The above recommended dosage is for reference, and the appropriate dosage needs to be determined through a series of tests. 

Addition method and processing guidance 

The additive can be added at any stage of the production process, including post-adding.

Plastic system curing at room temperature 

Product features and benefits 

This additive is used as an anti-crater and leveling additive in a variety of solvent-borne, solvent-free systems. Slightly reduces the surface tension, which is beneficial for atomization spraying or powder coating. VOK?-358 N does not cause cloudiness of the varnish or haze of the paint. 

Recommended Use 

The additive is recommended for use in a variety of room temperature curing resin systems, such as unsaturated polyester resins and epoxy resins. 

Recommended Dosage 0.1-0.5% 

The dosage of additives (form purchased) is based on the total formulation. 

The above recommended dosage is for reference, and the appropriate dosage needs to be determined through a series of tests. 

Addition method and processing guidance 

The additive can be added at any stage of the production process, including post-adding.