German technical background VOK-330 leveling agent Reduces the surface tension of room-temperature curing plastic systems replaces BYK-330

German technical background  VOK- 330 leveling agent

VOK- 330 contains silicone surface additives that significantly reduce the surface tension of room-temperature curing plastic systems. Improves substrate wettability and prevents surface defects. 

Product information 

Chemical composition 

Polyether-modified polydimethylsiloxane solution 

Typical physicochemical data 

The data presented on this data page is typical and not a product specification. 

Density (20 °C): 0.98 g/ml 

Non-volatile (60 min., 105 °C): 51% 

Solvent: propylene glycol methyl ether acetate 

Flash point: 45 °C 

。

Application areas 

Plastic system curing at room temperature 

Product Features & Benefits VOK-SL? 330 is a highly effective silicone additive that significantly reduces surface tension. This improves the wetting of demanding substrates, e.g. molds treated with release agents. The additive also prevents the formation of craters or fisheyes, which is beneficial for atomizing spraying or powder coating. 

Recommended Use

VOK- 330 is recommended for systems based on unsaturated polyester resins, e.g. gel coatings. 

Recommended dosage 

0.1-0.3% additive dosage (purchased form) is based on total formulation. 

The above recommended dosage is for reference, and the appropriate dosage needs to be determined through a series of tests. 

Addition method and processing guidance 

The additive can be added at any stage of the production process, including post-adding. The additive has proven to avoid foam stabilization when added at the final stage. 

Special considerations 

Compared to silicone fluids, this additive is easier to use. However, before use, a series of experiments should be carried out to confirm whether the additive will cause surface defects in some systems.