Finned tubes heat Exchangers Air Cooled Heat Exchangers

Air Cooled Heat Exchangers (Fin Fan Coolers) are apart from traditional Tubular heat exchangers manufacturing, We also have good experience in designing and manufacturing air-cooled heat exchangers for various industries.

We can provide various types of Fin Tube for different design applications. The most common type of Fin Tube used are L, LL, KL, G, Extrusion, and Wire wound.

Finned tubes Heat Exchangers

Application for finned tubes heat exchangers:

- Cooling or heating of air process

- Air cooling for electrical machines CACW

- Cooling water

- Transformer oil cooling for terrestrial or offshore equipment.

- Intake air Protection filters for power generation turbines 

- Marine applications or offshore.

Construction:

- Flat finned Tubes with turbulators, welded or expanded in collectors FLAT 
- Possibility of cleaning bundle inspection
- High mechanical strength of the finned block
- Use in restricting industrial environments

- Flat-finned Tubes with turbulators brazed on collectors
- For industrial environments use

- Flat finned Tubes with turbulators expanded into the single or double tube sheet
- Removable header covers to access the tubes for cleaning
- Leak detection system with double plates

- Double flat finned tubes with turbulators, expand the ed on the double tube sheet
- Removable header covers to access the tubes for cleaning
- Leak detection

- U Finned bundle expanded on tube sheets
- Removable covers or complete welded water boxes

All exchangers are manufactured and tested in accordance with the European Directive on Pressure Equipment (PED). On request, they can be subjected to an inspection or certification of your choice.
Mechanical calculations notes are performed according to our standard construction codes or on your request:
- EN 13445
- AD Merkblatter
- STOOMWEZEN
- ASME VIII Div 1

Air Cooled Heat Exchangers

An air-cooled heat exchanger system uses the ambient air temperature to cool a fluid circulating through a coil. This type of cooling can be used when the fluid being cooled is 5 F degrees or higher than the ambient temperature. An air-cooled heat exchanger is comprised of a coil, inlet/outlet headers, fans, motors, a structural stand, and several potential options.

Coils
Our coil tubes and fins can be manufactured using copper, stainless steel, aluminum, steel, and galvanized steel

Inlet/Outlet Headers
Headers can be threaded pipe, flanged pipe, boxed end headers, and plugged headers

Fans
Aluminum and Plastic fan blades are used in several different configurations.

Fan Arrangement 
Induced Draft or Forced Draft

Motors
NEMA and EC. Direct drive or Belt driven

Structural Stand
Heavy-duty galvanized steel with polyurethane paint, galvanized steel (no paint), or aluminum

OPTIONS

- Epoxy-coated fins

- E-Coat over the entire coil

- Air filters

- Fin spacing to meet specific applications

- Individual fan disconnects

- Custom mounting legs to meet height requirements

- Vibration dampers

- Control panels

- Pump Station

- Mist assist (lowers dry bulb temperature of the air before going over the cooling coil)