PP886H 3BSE069297R1

Brand:ABB

Type:PP886H 3BSE069297R1

Origin:the Swiss

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Standards Interference emission / immunity EN 61000-6-4 / EN 61000-6-2, industrial portion Protection class / protection system III / IP20 Insulation strength IEC 61131-2; test voltage 500 V DC Energy Supply Voltage supply of module electronics 24 V DC (18-32 V DC) SELV pursuant to DIN EN 60950-1 Current consumption of module electronics Max. 0.15 A Voltage supply of the digital I/O 24 V DC (SELV), divided into 6 groups Current consumption of the digital I/O At U = +24 V DC in idling, max. 300 mA; all digital I/O active, approx. 8 A Potential separation Yes, between E-bus and digital I/O Digital Inputs/Outputs Number of inputs 16 Number of inputs/outputs 16, each useable as inputs or outputs Output current Max. 0.5 A Short-circuit / reverse polarity protection Yes / yes, all digital outputs Accessories Plug-in terminal strips (6 are required per module) Designation Description Order number Screw terminal, 18-pole Up to max. conductor cross-section of 2.5 mm2 (14 AWG) VK055-018 Spring-power clamp, 18-pole Up to max. conductor cross-section of 2.5 mm2 (14 AWG) B95907-018 Detailed information and integration tips can be obtained from the user manual.

GENERAL The QEBUS-CAN module is designed for using the LocalCAN bus for external CAN bus nodes. The LocalCAN bus is integrated in the extension bus plug and is accessed via the QEBUS-CAN module by means of two D-Sub mating connectors. Furthermore, the QEBUS-CAN module offers the option of using a jumper to connect/disconnect a CAN termination resistor. The module is mounted onto a DIN top-hat rail and is directly attached to an MSC or MSC II or extension module via the Q-connector.

FEATURES ? The QEBUS-CAN module does not count as an E-bus node, it can be used in addition to the maximum number of E-bus modules ? The module can be placed either at the far left or far right in an E-bus segment ? The module has a smaller width than the QDIO, QAIO and RDIO modules ? The module does not need to be configured ? The E-bus does not pass through the module ? Both D-Sub mating connectors are identically wired ? The CAN bus can be connected to a power supply via X1