TRICONEX DO 3626X

Brand:TRICONEX

Type:DO 3626X

Origin:the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Function Blocks Data contained in this database is paged through the input and output images by coordination of the CompactLogix or MicroLogix 1500-LRP ladder logic and the MVI69EMBS module's program. Each block transferred from the module to the processor or from the processor to the module contains a block identification code that describes the content of the block.

Event Command Blocks (1000 to 1255, 2000 to 2255) Blocks 1000 to 1255: Event Port 1 Blocks 2000 to 2255: Event Port 2 Event Command blocks send Modbus commands directly from the ladder logic to one of the Master ports. The Event Command is added to the high-priority queue and interrupts normal polling so that this special command can be sent as soon as possible. Note: Overusing Event Commands may substantially slow or totally disrupt normal polling. Use Event Commands sparingly.

 Event Commands are meant to be used as one-shot commands triggered by special circumstances or uncommon events. Blocks 1000 to 1255 or 2000 to 2255: Request from Processor to Module Offset Description 0 Write Block ID: 1000 to 1255 for a Port 1 command or 2000 to 2255 for a Port 2 command. The last 3 digits of the command specify the slave address to use for the command. 1 Internal address in the module to be used with the command. 2 Count parameter that determines the number of digital points or registers to associate with the command. 3 Swap type for the data. 4 Modbus Function Code to be associated with the command. 5 Modbus address in the slave device to be used in the command. 6 to (n-1) Spare Where n = 60, 120, or 240 depending on the Block Transfer Size parameter. Blocks 1000 to 1255 or 2000 to 2255: Response from Module to Processor Offset Description 0 Read Block ID: 1000 to 1255 or 2000 to 2255 requested by the processor. 1 Write Block ID: To be used by the processor in its next Write block 2 Result of the event request. 1 = the command was placed in the command queue; 0 = no room was found in the command queue. 3 Number of commands in the command queue for the specified port. 4 to (n-1) Spare