DCP02 DCP10 Robot system card ABB imported module

DCP02 DCP10  Robot system card ABB imported module

DCP02 DCP10  Robot system card ABB imported module

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

In colder climates (ambient temperatures 0°F to -40°F) this cold weather

enclosure (CWE) allows mounting of the NGC directly on the pipe. This insulated

weatherproof enclosure has brackets for the NGC, a small start up/calibration

bottle and a removable plug that allows installation of the enclosure over the

probe. This keeps the entire sampling system heated to prevent liquid

condensation of the sample prior to analysis (see Figure 1—21). Having the

calibration bottle in the heated enclosure ensures a much more stable and

consistent calibration.

1.16.1 Enclosure

The heater and enclosure is designed to maintain a 40°F inside temperature when

outside temperature is -40°F. The enclosure assembly is 31” x 31” x 31” (inside

dimensions) and is made of polyurethane with hinged cover, access and precut

holes.

1.16.2 Heater Options

Options for this enclosure include a choice of either a 400 watt 120 volt A/C heater

(thermostat present at 50°F) or a 1500 Btu/hr. catalytic heater (thermostat preset

at 50°F).

1.16.3 Mounting Options

The CWE may be mounted directly on the pipe run, with or without the sample

probe enclosed. Optional support leg(s) are available for added support when

mounted on the pipe run.

Optionally, a free-standing kit may be used to mount the enclosure next to the

meter run.