PDD500A101 ABB 3BHE037649R0101 drive board control board mainboard card

PDD500A101 ABB 3BHE037649R0101 drive board control board mainboard card

PDD500A101 ABB 3BHE037649R0101 drive board control board mainboard card

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

The following two product functions can be used during the commissioning of the

relay: function test and digital input test.

The function test is used for testing the configuration as well as the connections

from the relay. By selecting this test, the internal signals from the protection stages,

the motor start-up signal, the external trip signal and the IRF function can be

activated one by one. Provided that the signals have been set to be routed to the

output contacts (PO1...PO3 and SO1...SO5) with the switches of SGR1...SGR8, the

output contacts are activated and their corresponding event codes are generated

when the test is run. However, activation of the internal signals from the protection

stages, the external trip signal and the IRF function do not generate an event code.

The digital input test is used for testing the connections to the relay. The state of the

digital inputs can be monitored via the HMI.

Refer to the Operator’s Manual for instructions on how to perform the tests.