wooden floor self-leveling mortar

wooden floor self-leveling mortar

Product description of wooden floor self-leveling mortar

 It is a kind of dry-mixed powdery material includes special cement, redispersible polymer powder, cellulose ethers and other active ingredient, is a high-tech environment –friendly product with advanced technology and formula refined. With fast hardening, people can walk on it after 4-5 hours, and 24 hours later can do surface construction, it’s more convenient for workers to operate than traditional artificial leveling.

Technical specification of wooden floor self-leveling motar

Standard: JC/T985-2005

Application range of wooden floor self-leveling motar

- It is suitable for residential offices and commercial terraces.

- It is suitable to apply the smooth surface for next plastic floors, carpets and other decorating  materials of hospitals, schools,    gyms and theaters, etc.

- It is suitable for grand hotel, hall of airport, department stores, meeting room, exhibition center, big  office and parking lot, etc.

- It is suitable to be the substrate of epoxy floor, pharmaceutical factory, food factory, industrial  workshop and kindergarten, etc.

Key properties of wooden floor self-leveling motar

- It is easy to construct by stirring with water manually or mechanically.

- It has good self-leveling and smoothness.

- It has high compressive strength and wear-resistance, low shrinkage that is not easy to crack or  generate delaminating and hollowing.

- It has rapid solidification, smooth surface that can be travelled after 4-5 hours. The plastic floor, carpet and tile can be paved on the surface after 24 hours.

- It is environmental and non-toxic product.

Construction method of wooden floor self-leveling motar

1.  The substrate must be clean, dry firm and no any residue, then use Xindadi special interface agent to paint the base plane.

2.   After about 2-6 hours, mixed with water before construction, be sure to strictly self-leveling cement: water25:6 ~ 6.5kg mixed. First 6 ~ 6.5kg of water into the bucket, then pour the product side down while stirring until a homogeneous mixture, lay up 1 minute, then stir once again briefly.

3.  Pour the mixture into the construction area, a zigzag rake to move to a desired uniform thickness (thickness constructability 1-4mm).

4. Before initial setting, use defoaming roller to exclude air which mixed in before.

Site pictures of Setaky wooden floor self-leveling motar

Packaging and Storage of wooden floor self-leveling motar

A. Standard Packing: In 25kg paper bags inner with PE bags

B. Big Bag or other special packages are possible on request.

Store it in dry condition, and storage time should not exceed one year.

Factory pictures of Setaky wooden floor self-leveling motar